PIC12F510/16F506
8/14-Pin, 8-Bit Flash Microcontroller
• Selectable oscillator options:
Devices Included In This Data Sheet:
- INTOSC: 4/8 MHz precision Internal
oscillator
• PIC16F506
• PIC12F510
- EXTRC: External low-cost RC oscillator
- XT: Standard crystal/resonator
- LP: Power-saving, low-frequency crystal
- HS: High-speed crystal/resonator
(PIC16F506 only)
High-Performance RISC CPU:
• Only 33 single-word instructions to learn
• All single-cycle instructions except for program
branches, which are two-cycle
- EC: High-speed external clock input
(PIC16F506 only)
• 12-bit wide instructions
• Analog-to-Digital (A/D) Converter:
• 2-level deep hardware stack
- 8-bit resolution
• Direct, Indirect and Relative Addressing modes
for data and instructions
- 4-input channels (1 channel is dedicated to
conversion of the internal 0.6V absolute
voltage reference)
• 8-bit wide data path
• High current sink/source for direct LED drive
• 10 Special Function Hardware registers
(PIC12F510)
• 8-bit real-time clock/counter (TMR0) with 8-bit
programmable prescaler
• 13 Special Function Hardware registers
(PIC16F506)
Low-Power Features/CMOS Technology:
• Operating speed:
- DC – 8 MHz Crystal Oscillator (PIC12F510)
- DC – 500 ns instruction cycle (PIC12F510)
- DC – 20 MHz Crystal Oscillator (PIC16F506)
- DC – 200 ns instruction cycle (PIC16F506)
• Operating Current:
- < 170 μA @ 2V, 4 MHz
• Standby Current:
- 100 nA @ 2V, typical
• Low-power, high-speed Flash technology:
Special Microcontroller Features:
- 100,000 cycle Flash endurance
- > 40-year retention
• 4 or 8 MHz selectable precision internal oscillator:
- Factory calibrated to ±1%
• Fully static design
• In-Circuit Serial Programming™ (ICSP™)
• In-Circuit Debugging (ICD) support
• Power-on Reset (POR)
• Wide operating voltage range: 2.0V to 5.5V
• Wide temperature range:
- Industrial: -40°C to +85°C
- Extended: -40°C to +125°C
• Device Reset Timer (DRT):
- Short DRT (1.125 ms, typical) for INTOSC,
EXTRC and EC
Peripheral Features (PIC12F510):
- DRT (18 ms, typical) for HS, XT and LP
• 6 I/O pins:
• Watchdog Timer (WDT) with dedicated on-chip
RC oscillator for reliable operation
- 5 I/O pins with individual direction control
- 1 input only pin
• Programmable code protection
• 1 Analog Comparator with absolute reference
• Multiplexed MCLR input pin
• Selectable internal weak pull-ups on I/O pins
• Power-Saving Sleep mode
Peripheral Features (PIC16F506):
• 12 I/O pins:
• Wake-up from Sleep on pin change
• Wake-up from Sleep on comparator change
- 11 I/O pins with individual direction control
- 1 input only pin
• 2 Analog Comparators with absolute reference
and programmable reference
© 2006 Microchip Technology Inc.
Preliminary
DS41268B-page 1
ETC [ ETC ]
