PFRX Polymeric PTC Resettable Fuse - Radial Leaded
Typical Time to Trip at 23˚C
1000
•
Cured, flame retardant epoxy polymer
insulating material meets
UL 94V-0 requirements
NEW
•
•
Bulk packaging, tape and reel and
Ammo-Pak available on most models
Applications: Almost anywhere there is a low
voltage power supply, up to 60V and a load
to be protected, including: computers &
peripherals, general electronics, automotive
applications
100
R
X
1
1
0
10
1
Approvals:
UL
recognition, file #E172175 (60V)
CSA
TÜV
acceptance, file #CA702083 (60V)
certification, file #R9872200 (60V)
0.1
0.01
0.001
1
10
100
Fault Current (Amps)
Package 1
Typical Part Marking
Represents total content. Layout may vary.
A
E
MANUFACTURER'S
TRADEMARK
PART
IDENTIFICATION
B
RX110
Lead Material
0.81 dia. (20AWG)
D
NOTE: Kinked lead option is available for
board standoff. Contact factory for
details.
C
Technical Data
-40°C to +85°C
Operating/Storage Temperature
Maximum Device Surface Temperature
in Tripped State
125°C
Passive Aging
Humidity Aging
Thermal Shock
Mechanical Shock
+85°C, 1000 hours
±5% typical resistance change
±5% typical resistance change
±10% typical resistance change
No resistance change
+85°C, 85% R.H. 1000 hours
+125°C/-40°C 10 times
MIL-STD-202, Method 213,
Condition 1 (100g, 6 seconds)
MIL-STD-202, Method 215
MIL-STD-883C, Method 2007.1,
Condition A
Solvent Resistance
Vibration
No change
No change
Test Procedures And Requirements
Test
Test Conditions
Verify dimensions and materials
In still air @ 23°C
5 times Ihold, Vmax, 23°C
30 min. at Ihold
Vmax, Imax, 100 cycles
Vmax, 48 hours
Accept/Reject Criteria
Per PF physical description
Rmin ≤ R ≤ Rmax
T ≤ max. time to trip (seconds)
No trip
Visual/Mech.
Resistance
Time to Trip
Hold Current
Trip Cycle Life
Trip Endurance
No arcing or burning
No arcing or burning
116
Schurter, Inc. Phone 707-778-6311 • Fax 707-778-6401 • E-mail info@schurterinc.com • Website http://www.schurterinc.com
•