Specifications
ispLSI 2064/A
Power Consumption
Power consumption in the ispLSI 2064 and 2064A de-
vices depends on two primary factors: the speed at which
the device is operating and the number of Product Terms
Figure 4. Typical Device Power Consumption vs fmax
160
150
140
130
120
used. Figure 4 shows the relationship between power
and operating speed.
ispLSI 2064/A
I
CC (mA)
110
100
90
80
70
1
20
40
60
80
100 120 140
f
max (MHz)
Notes: Configuration of Four 16-bit Counters
Typical Current at 5V, 25
°
C
ICC can be estimated for the ispLSI 2064/A using the following equation:
ICC(mA) = 38 + (# of PTs * 0.33) + (# of nets * Max freq * 0.007)
Where:
# of PTs = Number of Product Terms used in design
# of nets = Number of Signals used in device
Max freq = Highest Clock Frequency to the device (in MHz)
The ICC estimate is based on typical conditions (VCC = 5.0V, room temperature) and an assumption of two GLB loads
on average exists. These values are for estimates only. Since the value of ICC is sensitive to operating conditions
and the program in the device, the actual ICC should be verified.
0127A/2064A
8
ETC [ ETC ]
