VS1000
6
VS1000 FUNCTIONAL BLOCKS
The AVDD regulator output pin must be connected to AVDD1..AVDD3 pins with proper bypass
capacitors, because they are not connected internally.
The USB pins use the internal AVDD voltage, and the firmware configures AVDD to 3.6 V when
USB is attached.
Low AVDD voltage can be monitored by software. Currently the firmware does not take advan-
tage of this feature.
CBUF contains a short-circuit protection. It disconnects the CBUF driver if pin is shorted to
ground. In practise this only happens with external power regulation, because there is a limit to
how much power the internal regulators can provide.
Version: 1.4, 2011-10-06
15
ETC [ ETC ]
