MDS213
•
•
Up to 16K using external buffer memory
Standard software modules available:
• Browser, GUI, and text menu
• IEEE 802.1d Spanning Tree Algorithm
Data Sheet
-
-
-
-
SNMP management
Telnet for remote control console
Automatic Booting via TFTP Protocols.
Remote Monitoring (RMON) and storage for a management agent
• IGMP for IP multicast
• GVRP, GMRP
•
Packaged in 456-Pin Ball Grid Array
Description
The Zarlink MDS213 is a 12-port 10/100Mbps + 1Gbps high-performance, non-blocking Ethernet switch with on-
chip address memory and address lookup engine. A single chip provides 12 - 10/100Mbps ports and 1 - 1000Mbps
port. The MDS213 can be utilized in both managed and unmanaged switching applications.
The 3.2 Gbps XPipe allows a high-speed connection between two MDS213 chips, providing a optimal, low-cost,
workgroup switch with 24 10/100 Fast Ethernet ports and 2 Gigabit Ethernet ports.
In half-duplex mode, all ports support back pressure flow control to minimize the risk of losing data for long activity
bursts. In full-duplex mode, IEEE 802.3x frame based flow control is used. With full-duplex capabilities, each Fast
Ethernet ports supports 200Mbps aggregate bandwidth connections, while the Gigabit Ethernet port supports 2
Gbps to desktops, servers, or other high-performance switches. The Physical Coding Sublayer is integrated on-
chip with Ten Bit Interface (TBI) and this Physical Coding Sublayer can be bypassed when the GMII interface is
used.
The MDS213 supports port trunking/load sharing on the 10/100Mbps ports. Port trunking/load sharing can be used
to group ports between interlinked switches for increased system bandwidth. Ports within a trunk must reside within
a single MDS213, such that trunks may not be configured across two switches.
The on-chip address lookup engine supports up to 2K MAC addresses and up to 256 IEEE 802.1Q Virtual LANs
(VLAN). Each port may be programmed to recognize VLANs, and will transmit frames along with their VLAN Tags,
for interoperability, to systems that support VLAN Tagging.
Each port independently collects statistical information using SNMP and the Remote Monitoring Management
Information Base (RMON - MIB). Access to these statistical counter/registers are provided via the CPU interface.
SNMP Management frames may be received and/or transmitted via the CPU interface and thus creates a complete
network management solution.
The MDS213 utilizes cost effective, high performance, pipelined SBRAM to achieve full wire speed on all ports
simultaneously. Data is buffered into memory, using 0-128 byte bursts, from the ingress ports, and transferred to an
internal transmit FIFO, before being sent from the frame memory to the egress output ports. Extremely high
memory bandwidth is therefore achieved, which allows each of the ports to be active without creating a memory
bottleneck.
The MDS213 is fabricated with 2.5 V technology, where the inputs are 3.3V tolerant and the outputs are capable of
directly interfacing to Low-Voltage TTL levels. The Zarlink MDS213 is packaged in a 456-pin Ball Grid Array.
2
Zarlink Semiconductor Inc.
ZARLINK [ ZARLINK SEMICONDUCTOR INC ]
