MA8251
Parity error and overrun error are both checked in the same
3.9 DATA FORMAT, SYNCHRONOUS MODE
way as in the Asynchronous Receive mode. Parity is checked
when not in HUNT, regardless of whether the Receiver is
enabled or not.
DATA CHARACTERS
The CPU can command the receiver to enter the HUNT
mode if synchronisation is lost. This will also set all the used
character bits in the buffer to a one thus preventing a possible
false SYNDET caused by data that happens to be in the Rx
buffer at ENTER HUNT time.
ASSEMBLED SERIAL DATA OUTPUT (TxD)
SYNC CHAR 1 SYNC CHAR 2 DATA CHARACTERS
Note: the SYNDET flip-flop is reset at each Status Read,
regardless of whether internal or external SYNC has been
programmed. This does not cause the MA8251 to return to the
HUNT mode. When in SYNC mode, but not in HUNT, Sync
Detection is still functional, but only occurs at the known word
boundaries. Thus, if one Status Read indicates SYNDET and a
second Status Read also indicates SYNDET, then the
programmed SYNDET characters have been received since
the previous Status Read. (If double character sync has been
contiguously received to gate a SYNDET indication). When
external SYNDET mode is selected, internal Sync Detect is
disabled, and the SYNDET flip-flop may be set at any bit
boundary.
Figure 9: Receive Format, Synchronous Mode
SYNC CHAR 1 SYNC CHAR 2 DATA CHARACTERS
CPU BYTES (5-8 BITS/CHARACTER)
DATA CHARACTERS
Figure 10: Data Format, Synchronous Mode
3.8 MODE INSTRUCTION FORMAT, SYNCHRONOUS MODE
D7 D6 D5 D4 D3 D2 D1 D0
SS ES EP PEN L2 L1
0
0
CHARACTER LENGTH
0
0
1
0
0
1
1
1
5
6
7
8
BITS
BITS
BITS
BITS
PARITY ENABLE AND SENSE
1 = ENABLE 0 = DISABLE
1 = EVEN 0 = ODD
EXTERNAL SYNC DETECT
1 = SYNCDET IS AN INPUT
0 = SYNCDET IS AN OUTPUT
SINGLE CHARACTER SYNC
1 = SINGLE SYNC CHAR.
0 = DOUBLE SYNC CHAR.
Figure 11: Mode Instruction Format, Synchronous Mode
8
ZARLINK [ ZARLINK SEMICONDUCTOR INC ]
