SA5.0 THRU SA170A
DO-15
Features
*500W Peak pulse power capability
*Excellent clamping capability
*Low incremental surge resistance
*Fast response time:Typically less than 1.0ps from 0v to
1.0(25.4)
MIN.
VBR for unidirection and 5.0 ns for bidirectional types.
.140(3.6)
.104(2.6)
DIA.
Mechanical Data
*Cases:Molded plastic
*Epoxy:UL94V-0 rate flame retardant
*Lead:Axial leads,solderable per MIL- STD-202,
Method 208 guaranteed
.300(7.6)
.230(5.8)
*Polarity:Color band denotes cathode except Bipolar
*Mounting position:Any
1.0(25.4)
MIN.
*Weight:0.40 gram
.034(.9)
.028(.7)
DIA.
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25oC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Value
Units
W
A
Peak Power Dissipation (Note 1)
Minimun 500
PPPM
IPPM
Peak Pulse reverse current (Note 1)
Steady State Power Dissipation (Note 2)
See Table
W
A
1.0
70
PM(AV)
IFSM
Peak Forward Surge Current (Note 3)
Maximum Instaneous Forward Voltage at
50.0A for Unidirectional Only
VF
V
3.5
Operating and Storage Temperature Range
TJ,TSTG
0C
-55~+175
NOTES: 1. 10/1000us waveform Non-repetitive Current Pulse Per Fig.3 and Derated above TA=25oC Per Fig.2.
2.T1=75oC,lead lengths 9.5mm, Mounted on Copper Pad Area of (40 x40 mm) Fig.5
3.Measured on 8.3ms Single Half Sine-Wave or Equivalent Square Wave,Duty Cycle=4 Pulses Per Minute Maximun.
Devices for Bipolar Applications
1.For Bidirectional Use C or CA Suffix for Types SA5.0 thru types SA170 (e.g.SA5.0C,SA170CA)
2.Electrical Characteristics Apply in Both Directions.
YANGJIE [ YANGZHOU YANGJIE ELECTRONIC CO., LTD ]
