Card
Connectors
Specifications
Insulation Resistance:
Withstanding Voltage:
Contact Resistance:
Series CN015 - Type 30
Direct Mounting, Self Tapping Screw (w/o Ejector)
Part Number
(Details)
1,000MΩ min. at 500V DC
500V AC rms for 1 minute
40mΩ max. (initial resistance) excluding
conductor resistance of terminal (25mΩ)
Voltage Rating:
250V AC
Current Rating:
0.5A
Operating Temp. Range: –20°C to +60°C
CN015
Series No.
RZ - 30 1 2 - *
RZ = 3.3V for
SmartMedia Card (3.3V)
Type 30
PCB Mounting: 2 = Self Tapping Screw
(Screw ∅1.7mm See Note 1)
Height of Stand-off: ***)
0 = A(0.30mm), B(4.00mm), C(2.00mm)
2 = A(2.00mm), B(5.70mm), C(3.70mm)
***) Dimensions A, B and C are shown in drawings below.
Materials and Finish
Contact:
PB / Ni-Au
Insulator Base: PA, black
Features
SMT type terminals
Acceptable for automation mounting machine
Space saving design and low profile 4.0mm design
Type 30 with Self Tapping Screw
(CN015RZ-3012-0)
PCB Mounting:
Type 2 (Self Tapping) =
∅1.44
Recommended PCB Layout
(CN015RZ-3012-0)
Top View
(Self Tapping)
Type 30 with Self Tapping Screw
(CN015RZ-3012-2)
Recommended PCB Layout
(CN015RZ-3012-2)
Dimensions for CN015RZ-3012-2 are the same as above only the
self tapping srew hole distance is different and 2.00mm stand-off
Card Insertion Details
Info:
The Switch should be open when card is not inserted,
and should be closed when card is inserted
Note 1:
Use self tapping screw from the back side of 1.7mm or more (PCB thickness +2.0mm).
– Binding torque 1.28gfcm (0.118N . m) or less
– Repeated binding number = 5 times or less
Function Table
Part Number
CN015RZ-3012-0
CN015RZ-3012-2
Connectors
Voltage of
SmartMedia
3.3V
Ejector
No
Mis-insertion
Protection
No
Sequential
Contact
Yes
Write Protection
Switch
Yes
SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER