Card
Connectors
Specifications
Insulation Resistance:
Withstanding Voltage:
Contact Resistance:
Series CN015 - Type 20
Direct Mounting, SMT Fixing (with Ejector)
Part Number
(Details)
1,000MΩ min. at 500V DC
500V AC rms for 1 minute
40mΩ max. (initial resistance)
excluding conductor resistance
of terminal (25mΩ)
Voltage Rating:
250V AC
Current Rating:
0.5A
Operating Temp. Range: –20°C to +60°C
CN015
Series No.
RZ - 20 0 3 - 0
RZ = 3.3V for
SmartMedia Card (3.3V)
Type 20
PCB Mounting: 3 = SMT Fixing Metal Pads
Materials and Finish
Contact:
PB / Ni-Au
Insulator Base: PPS (glass filled) black
Height of Stand-off: ***)
0 = A(0.00mm), B(4.80mm), C(2.80mm)
***) Dimensions A, B and C are shown in drawings below.
Features
Realizing smooth extraction of SmartMedia by ejection function
Stand-off types are available to mount components under
the body of CN015
Adapting sequential method to secure data protection by contacting
in the order of Ground-Power-Signal correctly
Type 20 with SMT Metal Pads (3.3V)
Recommended PCB Layout
Top View
Function Table
Part Number
CN015RZ-2003-0
Connectors
Special notice for operation:
Never soak and wash after soldering. There are cases whereSmartMedia
can not be smoothly inserted because of flux remaining inside of the
connector, after washing. Wash only part of the connector terminal on PC board.
Voltage of
SmartMedia
3.3V
Ejector
Yes
Mis-insertion
Protection
Yes
Sequential
Contact
Yes
Write Protection
Switch
Yes
SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER
YAMAICHI [ YAMAICHI ELECTRONICS CO., LTD. ]
