Product specification
12
16
High-Voltage
NP0
/X7R 1 KV to 3 KV
Surface-Mount Ceramic Multilayer Capacitors
SOLDERING RECOMMENDATION
Table 7
SOLDERING
METHOD
SIZE
0402
0603
≥ 1.0 µF
< 1.0 µF
0805
≥ 2.2 µF
< 2.2 µF
1206
≥ 4.7 µF
< 4.7 µF
≥ 1210
Reflow only
---
Reflow
≥ 0.1 µF
Reflow/Wave
< 0.1 µF
TESTS AND REQUIREMENTS
Table 8 Test procedures and requirements
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
IEC 60384- 4.3
21/22
The capacitors may be mounted on printed-circuit boards or
ceramic substrates
No visible damage
Mounting
4.4
Any applicable method using × 10 magnification
In accordance with specification
Within specified tolerance
Visual
Inspection and
Dimension
Check
4.5.1 Class 1:
Capacitance
f = 1 MHz for C ≤ 1 nF, measuring at voltage 1 Vrms at 20 °C
f = 1 KHz for C > 1 nF, measuring at voltage 1 Vrms at 20 °C
Class 2:
f = 1 KHz for C ≤ 10 µF, measuring at voltage 1 Vrms at 20 °C
4.5.2 Class 1:
In accordance with specification
Dissipation
f = 1 MHz for C ≤ 1 nF , measuring at voltage 1 Vrms at 20 °C
Factor (D.F.)
f = 1 KHz for C > 1 nF, measuring at voltage 1 Vrms at 20 °C
Class 2:
f = 1 KHz for C ≤ 10 µF, measuring at voltage 1 Vrms at 20 °C
4.5.3
4.6
Ur ≤ 500 V: At Ur for 1 minute
In accordance with specification
Insulation
Resistance
Ur > 500 V: At 500 V for 1 minute
Class 1:
C/C:
Temperature
Coefficient
Between minimum and maximum temperature
NP0: -55 °C to +125 °C
Normal Temperature: 20 °C
Class 1:
NP0: ±30 ppm/°C
Class 2:
Class 2
Temperature
Characteristic
Between minimum and maximum temperature
X7R: -55 °C to +125 °C
Normal Temperature: 20 °C
X7R: ±15%
www.yageo.com
Aug 08, 2011 V.4
YAGEO [ YAGEO CORPORATION ]
