100W Single Output Switching Power Supply
Features :
CLG-100
series
Universal AC input / Full range
Protections:Short circuit/Over load/Over voltage/Over temperature
Built-in active PFC function
IP67 design for indoor or outdoor installations
UL1310 Class 2 power unit
Cooling by free air convection
100% full load burn-in test
High realibility
Suitable for LED lighting and moving sign applications
3 years warranty (Note.7)
SPECIFICATION
MODEL
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
RATED POWER
VOLTAGE ADJ. RANGE
CURRENT ADJ. RANGE
VOLTAGE TOLERANCE
Note.3
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD TIME (Typ.)
VOLTAGE RANGE
FREQUENCY RANGE
POWER FACTOR
INPUT
EFFICIENCY (Typ.)
AC CURRENT
INRUSH CURRENT(max.)
LEAKAGE CURRENT
OVER CURRENT
PROTECTION OVER VOLTAGE
OVER TEMPERATURE
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
WITHSTAND VOLTAGE
Note.4
( for 48V only)
( except for 48V )
IP67
CLG-100-36
36V
2.65A
0 ~ 2.65A
95.4W
150mVp-p
CLG-100-48
48V
2A
0 ~ 2A
96W
200mVp-p
CLG-100-12
12V
Note.6
5A
Note.6
0 ~ 5A
Note.6
60W
CLG-100-15
15V
5A
0 ~ 5A
75W
150mVp-p
CLG-100-20
20V
4.8A
0 ~ 4.8A
96W
150mVp-p
CLG-100-24
24V
4A
0 ~ 4A
96W
150mVp-p
CLG-100-27
27V
3.55A
0 ~ 3.55A
95.85W
150mVp-p
RIPPLE & NOISE (max.)
Note.2
150mVp-p
OUTPUT
Fixed. Can be modified between 0% ~ -15% rated output voltage
Fixed. Can be modified between 3% ~ -25% rated output current
3.0%
1.0%
2.0%
1200ms, 80ms / 230VAC
60ms / 230VAC
Note.5
90 ~ 264VAC
3.0%
3.0%
3.0%
3.0%
2.0%
2.0%
1200ms, 80ms / 115VAC at full load
30ms / 115VAC at full load
47 ~ 63Hz
PF>0.95/230VAC
83%
PF>0.98/115VAC at full load
85%
87%
87%
87%
0.45A/230VAC
87%
20V ~ 48V:1.1A/115VAC
87%
0.55A/230VAC
15V:0.9A/115VAC
12V:0.8A/115VAC 0.4A/230VAC
COLD START 40A/230VAC
0.5mA / 240VAC
95 ~ 100%
Protection type : Constant current limiting, recovers automatically after fault condition is removed
13 ~ 16V
16.5 ~ 20V
22 ~ 27V
27 ~ 34V
29 ~ 36V
39 ~ 48V
Protection type : Shut down and latch off o/p voltage, re-power on to recover
90
10
(RTH2)
(Refer to output load derating curve), -40
, 10 ~ 95% RH
(0 ~ 50
)
possible
Protection type : Shut down o/p voltage, re-power on to recover
-30 ~ +70
-40 ~ +80
0.03%/
20 ~ 90% RH non-condensing
52 ~ 64V
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
UL1310 Class 2, TUV EN60950-1, CAN/CSA C22.2 No. 223-M91(except for 48V),IP67 Approved
I/P-O/P:4.25KVDC
SAFETY & ISOLATION RESISTANCE
I/P-O/P:100M Ohms/500VDC
EMC
EMI CONDUCTION & RADIATION
Compliance to EN55022 (CISPR22) Class B
HARMONIC CURRENT
EMS IMMUNITY
MTBF
OTHERS
DIMENSION
PACKING
NOTE
Compliance to EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A
301Khrs min. MIL-HDBK-217F (25 )
222*68*39mm (L*W*H)
1.0Kg; 12pcs/13Kg/0.49CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Please refer to OLP characteristics.
5. Derating may be needed under low input voltages. Please check the derating curve for more details.
6. This is the maximum possible output current and power, over load protection may be activated slightly below this level to comply with the requirement
of UL1310 class 2.
7. 3 years warranty is guaranteed for operating ambient temperature no higher than 68 .
File Name:CLG-100-SPEC 2006-08-30
XPPOWER [ XP POWER LIMITED ]
