CA SERIES - ACCESSORY
MTG HARDWARE
SUPPLIED
4.26
(108.20)
15S SUB-MIN 'D'
RECEPTACLE
AMP # 747909-2
8 15
1.80
(45.72)
MHV
MATING
CONNECTOR
1
9
SOLDER
CUP SIDE
1.33
(33.78)
HIGH
VOLTAGE
15P SUB MIN-D
PLUG (MALE)
AMP # 747841-4
.50
(12.7)
3.04 (77.22)
.89 (22.56)
MHV
OUTPUT
CONNECTOR
1.57
(39.88)
.05 (1.27)
THICK
.74 (18.80)
1.300
(33.02)
.25 (5.84)
#4-40 MTG HOLE
4 PLACES
.37
(9.40)
GAIN
ADJUST
2.200 (55.88)
ANODIZED
ALUMINUM
MOUNTING PLATE
PRODUCT DESCRIPTION
PRODUCT DESCRIPTION
These adapters provide convenient proto-typing and evaluation during
system development and integration, and allow these modules to be
mounted to a chassis instead of designed in to a pc board.
Extra filtering on the input and output improves performance. A schottky
diode on the input provides reverse polarity protection. Input connector
is via a 15P SUB MIN-D plug (mate supplied) and output is via an MHV
style coaxial connector (mate supplied).
PROGRAMMING OPTIONS / INSTRUCTIONS
1. Onboard Potentiometer: connect pins 7 to 4 and 8 to 3, turn
potentiometer to adjust high voltage.
2. Remote Potentiometer: connect wiper arm to pin 3, other sides
to pins 4 and 2.
3. Remote Analog Signal: apply programming voltage to pin 3,
return to pin 2.
ORDERING INFORMATION:
Please note when ordering a CM1 the CA Series is not included and
must be ordered separately.
WWW.XPPOWER.COM
4709CA02
PAGE 5
XPPOWER [ XP POWER LIMITED ]
