CA SERIES - ACCESSORY
CM2: ALL CA MODELS
PRODUCT DESCRIPTION
PRODUCT DESCRIPTION
These adapters provide convenient proto-typing and evaluation during
system development and integration, and allow these modules to be
mounted to a chassis instead of designed in to a pc board.
Extra filtering on the input and output improves performance. A schott-
ky diode on the input provides reverse polarity protection. Input con-
nector is via a 15P SUB MIN-D plug (mate supplied) and output is via
an SHV style coaxial connector (mate supplied).
PROGRAMMING OPTIONS / INSTRUCTIONS
1. Onboard Potentiometer: connect pins 7 to 4 and 8 to 3, turn
potentiometer to adjust high voltage.
2. Remote Potentiometer: connect wiper arm to pin 3, other sides
to pins 4 and 2.
3. Remote Analog Signal: apply programming voltage to pin 3, re-
turn to pin 2.
ORDERING INFORMATION:
Please note when ordering an CM2 the CA Series is not
included and must be ordered separately.
We reserve the right to make changes without notification
PAGE 8 OF 8
4709BO
www.emcohighvoltage.com
e-mail: sales@emcohighvoltage.com
phone: (209) 267-1630, fax (209) 267-0282
70 Forest Products Rd, Sutter Creek, CA 95685 USA
XPPOWER [ XP POWER LIMITED ]
