AG SERIES
ELECTRICAL SPECIFICATIONS*
3
PARAMETER
INPUT VOLTAGE
TURN-ON VOLTAGE
ISOLATION
OUTPUT VOLTAGE TOLERANCE
INPUT/OUTPUT COUPLING CAPACITANCE
INPUT/OUTPUT LEAKAGE CURRENT
CONTROL PIN
INTERNAL OSCILLATOR FREQUENCY
STANDARD TEMPERATURE RANGES
EXTENDED TEMPERATURE RANGES (-T OPTION)
VALUE
0 TO 5, 12, OR 24V (FOR MODELS UP TO 3KV)
0 TO 5V (FOR MODELS OVER 3KV)
<0.7 VDC
< +/- 500V BIAS ON PIN 4
+10%, -10% FULL LOAD, MAX. INPUT VOLTAGE
<250 pf TYPICAL
<100 nA TYPICAL
0 TO MAX INPUT VOLTAGE
50kHz - 350kHz
OPERATING: -25° TO +75°C
*6
(CASE)
STORAGE: -55° TO +105°C
OPERATING: -55° TO +85°C
*6
(CASE) (AG Models/1.0W)
STORAGE: -55° TO +105°C
DETAILED PRODUCT DESCRIPTION
The AG Series is a new line of ultra-miniature, DC to HV DC convert-
ers that set an industry standard in high voltage miniaturization. These
component-sized converters are ideal for applications requiring minimal
size and weight. Occupying less than one tenth of a cubic inch of volume
*5
,
this unique package features an extremely low profile of only 0.128 inches
(3.25mm) when mounted in from the top, or 0.152 (3.86mm) when mounted
in from the bottom of the PCB! The AG Series converter can also mount off
the PCB with .030” diameter pins. See page 9 for illustrations. Controllable
output voltages range from 100 volts to 6000 volts.
Turn-on voltage is very low at less than 0.7 volts, allowing for wide output
voltage operating range. Use of a resonant, quasi-sinewave oscillator and
fully shielded transformer result in clean, reliable high voltage conversion
with inherently low ripple, EMI/RFI and input ripple current, making this
product ideal for integration into noise sensitive equipment.
A separate high impedance control pin is standard and is designed for
external error amplifier and/or DAC control in closed or open loop systems,
or simply connect the control pin to the + input for proportional input to
output operation (see performance charts below).
Output power is 1 watt standard, with 1.5 watts available as an option. No
minimum load is required. A proprietary vacuum encapsulation process and
custom 94V-0 listed, high performance formula are used to achieve excellent
high voltage and thermal properties. Isolation is +/- 500V bias on the output
return. Input to output leakage current is very low at less than 100 nA and
coupling capacitance is also low at <250 pF.
The AG Series leverages XP EMCO’s Best-in-Class long-term reli-
ability, utilizing proven DC to high voltage DC conversion technology,
perfected by over four decades of high voltage design experience
in the most demanding applications. Our extensive in-house capabili-
ties enable us to meet specific customer requirements with standard,
modified and custom solutions quickly, easily, and economically. Technical
assistance is readily available.
WWW.XPPOWER.COM
4718L06
PAGE 3
XPPOWER [ XP POWER LIMITED ]
