DDR2-400, 533
Single Rank, x8 Registered SDRAM DIMMs
Absolute Maximum Ratings:
Exposure to stresses greater than these absolute maximum rating conditions for extended periods may affect
reliability of the module.
Symbol
Parameter
Min Max Units
VDD
VDD supply voltage relative to VSS
-1.0
-0.5
-0.5
-0.5
-55
0
2.3
2.3
2.3
2.3
+100
+55
5
V
V
VDD
VDD
Q
L
VDDQ supply voltage relative to VSS
VDDL supply voltage relative to VSS
V
V
VIN, VOUT Voltage on any pin relative to VSS
TSTG
TOPR
IIL
Storage temperature (Tcase)
°C
°C
µA
µA
Operating Temperature (Ambient)
Input Leakage Current; Any input 0V ≤ VIN ≤ 0.95V
Output Leakage Current; 0V ≤ VOUT ≤ VDDQ; DQS and ODT are disabled
-5
-5
IOL
5
DC Operating Conditions:
Parameter
Symbol
Min
1.7
Nom
1.8
Max
Units Notes
Supply Voltage
VDD
1.9
1.9
V
V
1
4
4
2
3
VDDL Supply Voltage
I/O Supply Voltage
I/O Reference Voltage
I/O Termination Voltage (system)
VDD
L
Q
1.7
1.8
VDD
1.7
1.8
1.9
V
VREF
VTT
0.49 x VDD
Q
0.50 x VDD
Q
0.51 x VDD
Q
V
VREF - 40
VREF
VREF + 40
mV
NOTE:
1.
VDD and VDDQ must keep track of each other. VDDQ cannot exceed the value of VDD
2. VREF is expected to equal VDDQ/2 of the transmitting device and to track variations in the DC level of the same
3. TT is not applied directly to the device. VTT is a system supply for signal termination resistors, is expected to
V
be set equal to VREF and must track variations in the DC level of VREF
4. VDDQ must tracks VDD; and VDDL tracks VDD
Input/Output Capacitance:
VDD = +1.8V ± 0.1V, VDDQ = +1.8V ± 0.1V, VREF = VSS, f =100MHz, 0°C<TOPR <+55°C, VOUT(DC) = VDDQ/2
Parameter
Symbol
Min
Max
Units
CCK
1.0
2.0
pF
Input Capacitance: CK,
CK
CDCK
CI
-
1.0
0.25
2.0
pF
pF
Delta Input Capacitance: CK,
CK
Input Capacitance: BA0, BA1, A0-A12,
,
,
CS RAS
,
, CKE, ODT
CAS WE
Delta Input Capacitance: BA0, BA1, A0-A12,
CDI
-
0.25
pF
,
CS
,
,
, CKE, ODT
RAS CAS WE
Input/Output Capacitance: DQs, DQS, DM, NF
Delta Input/Output Capacitance: DQs, DQS, DM, NF
CIO
CDIO
3.0
-
4.0
0.5
pF
pF
DDR2_RDIMM_1 rank_x8_spec
Rev. 1.0 - December, 04
Wintec Industries, Inc., reserves the right to change datasheets and/or products without any notice.
2004 Wintec Industries, Inc.
4