Platform Cable USB II
Physical Description
The Platform Cable USB II electronics are housed in a recyclable, fire-retardant plastic case (Figure 2). An internal EMI
shield attenuates internally generated emissions and protects against susceptibility to radiated emissions.
X-Ref Target - Figure 2
®
STATUS
2mm
RoHS
Platform Cable USB II CONNECTOR
Compliant
SIGNALS
JTAG orSerial or SPI
53.3 mm
HALT
INIT WP
---- ----
DIN MOSI
PGND
Gnd
Gnd
Gnd
Gnd
Gnd
----
Model DLC10
Power 5V 0.15A
Top View
----
TDI
TDO DONE MISO
Serial XU - 12345 TCK CCLK SCK
TMS PROG
SS
HI-SPEED
VREF VREF VREF
CERTIFIED
USB
Made in U.S.A.
1.5 < VREF < 5.0 VDC
115.6 mm
Side View
16.5 mm
25.4 mm
DS593_02_021908
Figure 2: Plastic Case Physical Description
Operation
This section describes how to connect and use Platform Cable USB II.
Minimum Host System Requirements
The host computer must contain a USB Host Controller with one or more USB ports. The controller can reside on the PC
motherboard, or can be added using an expansion or PCMCIA card.
Platform Cable USB II is designed to take full advantage of the bandwidth of USB 2.0 ports, but it is also backward-
compatible with USB 1.1 ports. Refer to USB Hub Types and Cable Performance, page 28 for additional information on
connection environments and bandwidth.
Table 1 lists Platform Cable USB II compatibility with the Xilinx design tools.
DS593 (v1.2.1) March 17, 2011
www.xilinx.com
3
XILINX [ XILINX, INC ]
