R
MultiPRO Desktop Tool
Revision History
The following table shows the revision history for this document.
Date
Version
1.0
Revision
12/10/02
12/24/02
Initial Xilinx release.
1.1
Updated "Features", "Status Indicators", and "Adapter Port: 20-Pin DIN Connector Interface Pin
Descriptions".
01/24/03
1.2
Updated "Features", "Device Adapters", Table 1, "Automatic Voltage Sensing", Table 7, and "Ordering
Information".
04/10/03
04/29/03
1.3
1.4
Added list of supported Spartan-3 devices.
Added Platform Flash PROM family to "Desktop Device Programming", "MultiPRO Desktop Tool
Description", and "Ordering Information". Added "XCF00S/P" to "Device Adapters".
09/29/04
01/04/06
1.5
1.6
• Added part numbers HW-MP-FS48 and HW-MP-VO48 to table in section "Ordering Information,"
page 11.
• Section "External Power Supply," page 3: Changed specification of power supply.
• Updated supported list of Xilinx devices and added recommendation for product usage during
development in section "In-System Programming/Configuration," page 1.
• Added part numbers HW-MP-QF32 and HW-MP-QF48 to section "Ordering Information," page 11.
• Updated OUPIIN part numbers in Figure 7, Figure 8, Table 3, and Table 4.
• Promoted to Product Specification.
08/31/06
1.7
Updated the maximum download speed to 10 MHz and provided references to related firmware and
software requirements.
08/09/07
02/08/08
1.8
1.9
Added support for SPI.
• Updated document template.
• Added discontinuance notice to page 1.
Notice of Disclaimer
THE XILINX HARDWARE FPGA AND CPLD DEVICES REFERRED TO HEREIN (“PRODUCTS”) ARE SUBJECT TO THE TERMS AND
CONDITIONS OF THE XILINX LIMITED WARRANTY WHICH CAN BE VIEWED AT http://www.xilinx.com/warranty.htm. THIS LIMITED
WARRANTY DOES NOT EXTEND TO ANY USE OF PRODUCTS IN AN APPLICATION OR ENVIRONMENT THAT IS NOT WITHIN THE
SPECIFICATIONS STATED IN THE XILINX DATA SHEET. PRODUCTS ARE NOT DESIGNED OR INTENDED TO BE FAIL-SAFE OR
FOR USE IN ANY APPLICATION REQUIRING FAIL-SAFE PERFORMANCE, SUCH AS LIFE-SUPPORT OR SAFETY DEVICES OR
SYSTEMS, OR ANY OTHER APPLICATION THAT INVOKES THE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR
PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL APPLICATIONS”). USE OF PRODUCTS IN CRITICAL APPLICATIONS IS AT
THE SOLE RISK OF CUSTOMER, SUBJECT TO APPLICABLE LAWS AND REGULATIONS.
DS114 (v1.9) February 8, 2008
www.xilinx.com
Product Specification
12
XILINX [ XILINX, INC ]
