A Dimensions: [mm]
B Land Pattern: [mm]
D Electrical Properties:
Properties
Inductance
Test conditions
Value
0.24
0.22
18.0
40.0
1.8
Unit
µH
Tol.
±20%
typ.
100 kHz/ 100 mV
100 kHz/ 100 mV/ 18.0 A
∆T = 50 K
L
Rated inductance
Rated current
L
µH
R
R
I
A
max.
typ.
Saturation current
DC Resistance
|ΔL/L| < 30%
I
A
sat
@ 20°C
R
mΩ
MHz
±10%
typ.
DC
Self resonant frequency
f
220
res
C Schematic:
E General information:
It is recommended that the temperature of the part does not exceed 150°C
under worst case operating conditions.
Ambient temperature: -40°C to +100°C (refering to I )
R
Operating temperature: -40°C to +150°C
Storage temperature (on tape & reel): -20°C to +40°C; 75% RH max.
Test conditions of Electrical Properties: 20°C, 33% RH
if not specified differently
DESCRIPTION
WE-HCI SMD Flat Wire High Current
Inductor
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
Order.- No.
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
SIZE
A4
5.0
4.0
REV
2012-09-03
2008-01-01
DATE
SSt
ME
BY
BD
744310024
Size: 7030
CHECKED
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.
Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before
the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
WURTH [ WURTH ELEKTRONIK GMBH & CO. KG, GERMANY. ]
