Pilkor components
Metallized Polypropylene Film Capacitors
( AC-filtering application )
P255
(PCPW 255)
CHARACTERISTICS
DRAFT
ꢀ
ꢀ
ꢀ
Test Voltage
. Cut off current 10mA ( rise time ≤ 1000V/sec. )
. Test Voltage ( between terminations ) : 1.5 x VR applied for 10s
Capacitance
. Capacitance : Within specified tolerance range when sine wave AC is applied
at 1kHz
200Hz and max. 5Vrms
Insulation Resistance
The insulation resistance is measured after a voltage has been applied at 500V for 1min. ±5 sec.
RC ( > 10,000 s
( R = Insulation resistance between the terminations[ ], C = Capacitance[Farad] )
PRODUCT MARKING
Capacitors are marked on the top or on the top and one side with the following information :
. Rated capacitance code in accordance with IEC 60062
. Tolerance on rated capacitance : J :
5 % K :
10 %
. Rated (AC) Voltage ( e.g. 250 V~ )
. Code for dielectric material (MKP)
. Manufacturer's type designation ( PCPW 255 or 255 )
. Manufacturer's name (PILKOR)
Example of marking
14u K 350V~
255 MKP ꢀ.
PILKOR
14u
K
350V~
PILKOR
PCPW 255 MKP WKꢀ.
Marking on the top
or
Marking on the top
TYPE SPECIFICATION
( C ) PILKOR ELECTRONICS 2013
8 OF 8
14-07-24
QSN-075-77
WPI [ World Produts Inc. ]
