欢迎访问ic37.com |
会员登录 免费注册
发布采购

WM8912GEFL/RV 参数 Datasheet PDF下载

WM8912GEFL/RV图片预览
型号: WM8912GEFL/RV
PDF下载: 下载PDF文件 查看货源
内容描述: 超低功耗DAC与耳机驱动器的便携式音频应用 [Ultra Low Power DAC with Headphone Driver for Portable Audio Applications]
分类和应用: 驱动器便携式
文件页数/大小: 128 页 / 1259 K
品牌: WOLFSON [ WOLFSON MICROELECTRONICS PLC ]
 浏览型号WM8912GEFL/RV的Datasheet PDF文件第30页浏览型号WM8912GEFL/RV的Datasheet PDF文件第31页浏览型号WM8912GEFL/RV的Datasheet PDF文件第32页浏览型号WM8912GEFL/RV的Datasheet PDF文件第33页浏览型号WM8912GEFL/RV的Datasheet PDF文件第35页浏览型号WM8912GEFL/RV的Datasheet PDF文件第36页浏览型号WM8912GEFL/RV的Datasheet PDF文件第37页浏览型号WM8912GEFL/RV的Datasheet PDF文件第38页  
WM8912  
Production Data  
DAC SOFT MUTE AND SOFT UN-MUTE  
The WM8912 has a soft mute function. When enabled, this gradually attenuates the volume of the  
DAC output. When soft mute is disabled, the gain will either gradually ramp back up to the digital  
gain setting, or return instantly to the digital gain setting, depending on the DAC_UNMUTE_RAMP  
register bit.  
To mute the DAC, this function must be enabled by setting DAC_MUTE to 1.  
Soft Mute Mode would typically be enabled (DAC_UNMUTE_RAMP = 1) when using DAC_MUTE  
during playback of audio data so that when DAC_MUTE is subsequently disabled, the sudden  
volume increase will not create pop noise by jumping immediately to the previous volume level (e.g.  
resuming playback after pausing during a track).  
Soft Mute Mode would typically be disabled (DAC_UNMUTE_RAMP = 0) when un-muting at the start  
of a music file, in order that the first part of the track is not attenuated (e.g. when starting playback of  
a new track, or resuming playback after pausing between tracks).  
DAC muting and un-muting using volume control bits  
DACL_VOL and DACR_VOL.  
DAC muting and un-muting using the DAC_MUTE bit.  
If soft Mute Mode is not enabled (DAC_UNMUTE_RAMP = 0):  
Setting the DAC_MUTE bit causes the volume to ramp down  
at a rate controlled by DAC_MUTERATE.  
Clearing the DAC_MUTE bit causes the volume to return to  
the un-muted level immediately.  
DAC muting and un-muting using the DAC_MUTE bit.  
If soft Mute Mode is enabled (DAC_UNMUTE_RAMP = 1):  
Setting the DAC_MUTE bit causes the volume to ramp down.  
Clearing the DAC_MUTE bit causes the volume to ramp up to  
the un-muted level at a rate controlled by DAC_MUTERATE.  
Figure 21 DAC Mute Control  
The volume ramp rate during soft mute and un-mute is controlled by the DAC_MUTERATE bit.  
Ramp rates of fs/32 and fs/2 can be selected, as shown in Table 18. The ramp rate determines the  
rate at which the volume is increased or decreased. The actual ramp time depends on the extent of  
the difference between the muted and un-muted volume settings.  
PD, Rev 4.0, September 2010  
34  
w
 复制成功!