WM8850
Pre-Production
CHANNEL STATUS DATA PACKING CONFIGURATION VERB (VENDOR-
SPECIFIC)
Verb ID
F85h
Payload [7:0]
00h
Response[31:0]
Get
Set
Bits [31:0] in the table below
00000000h
785h
Bits [7:0] in the table below
Bit
Bitfield Name
Rsvd
RW
R
Default
0000000h
1
Description
[31:1]
[0]
Reserved
CSD_MODE
RW
S/PDIF Transmitter Channel Status Data Packing Mode:
0 = Manual mode: sample rate and data width channel status data
packed from data sourced from the Tx Channel Status Control Verb
1 = Automatic mode: sample rate and data width channel status data
packed from data sourced from the Stream Verb, S/PDIF Verb or S/PDIF
Rx Rate Detector (depending on routing through device)
UNSOLICITED RESPONSE PRIORITY CONTROL VERB (VENDOR-SPECIFIC)
Verb ID
F8Eh
Payload [7:0]
00h
Response[31:0]
Get
Set
Bits [31:0] in the table below
00000000h
78Eh
Bits [7:0] in the table below
Bit
Bitfield Name
Rsvd
RW
R
Default
0000000h Reserved
00h
Description
[31:5]
[4:0]
Priority
RW
Assigns a priority setting for queued Unsolicited Responses. Nodes with
the lowest value have the highest priority, and so go to the front of the
Unsolicited Response queue. Nodes with the same value for priority are
queued on first-to-trigger basis.
00h = Highest priority
…
1Fh = Lowest priority
PP, April 2011, Rev 3.2
218
w
WOLFSON [ WOLFSON MICROELECTRONICS PLC ]
