WM8352
ABSOLUTE MAXIMUM RATINGS
Production Data
5
Absolute Maximum Ratings are stress ratings only. Permanent damage to the device may be caused by continuously operating at
or beyond these limits. Device functional operating limits and guaranteed performance specifications are given under Electrical
Characteristics at the test conditions specified.
ESD Sensitive Device. This device is manufactured on a CMOS process. It is therefore generically susceptible to
damage from excessive static voltages. Proper ESD precautions must be taken during handling and storage of
this device.
Wolfson tests its package types according to IPC/JEDEC J-STD-020B for Moisture Sensitivity to determine acceptable storage
conditions prior to surface mount assembly. These levels are:
MSL1 = unlimited floor life at <30°C / 85% Relative Humidity. Not normally stored in moisture barrier bag.
MSL2 = out of bag storage for 1 year at <30°C / 60% Relative Humidity. Supplied in moisture barrier bag.
MSL3 = out of bag storage for 168 hours at <30°C / 60% Relative Humidity. Supplied in moisture barrier bag.
The WM8352 has been classified as MSL3.
CONDITION
MIN
MAX
+7V
BATT, LINE and USB voltage
-0.3V
-0.3V
-0.3V
-0.3V
-0.3V
-0.3V
Input voltage for LDO regulators (pins VINA, VINB)
Analogue supply voltages (AVDD, HPVDD)
Digital supply voltages (DCVDD, DBVDD)
Voltage range for CODEC analogue inputs
Voltage range for digital inputs
+7V
+4.5V
+4.5V
AVDD + 0.3V
DBVDD + 0.3V
37MHz
Master Clock Frequency
(When MCLK_DIV set to divide by 2)
Operating Temperature Range, TA
-25°C
-20°C
+85°C
+125°C
32°C/W
Junction Temperature, TJ
Thermal Impedance Junction to Ambient, θJA
Storage temperature prior to soldering
Storage temperature after soldering
30oC max / 60% RH max
-65°C
+150°C
+260°C
Soldering temperature (10 seconds)
Note: These ratings assume that all ground pins are at 0V.
PD, February 2011, Rev 4.4
14
w