The Communications Edge
TM HMJ5
High Dynamic Range FET Mixer
Product Information
Outline Drawing
Product Marking
The component will be marked with an
“HMJ7” designator with
a
four-digit
alphanumeric lot number XXXX.
Tape and reel specifications for this part are
located on the website in the “Application
Notes” section.
ESD Information
ESD Rating:
Value:
Test:
Standard:
Class 2
Passes at 2000 V
Human Body Model (HBM)
JEDEC Standard JESD22-A114
ESD Rating:
Value:
Test:
Standard:
Class IV
Passes at 2000 V
Dimensions are expressed in Inches.
TOLERANCE .XXX [ .015 .XX [ .02
Drawing is illustrated at Max dimensions.
Charged Device Model (CDM)
JEDEC Standard JESD22-C101
Mounting Config. Notes
1. Ground vias are critical for thermal and RF grounding
considerations.
2. A minimum of 36 ground vias are required for 14 mil
FR4 boards.
3. If your PCB design rules allow, ground vias should be
placed under the land pattern for better RF and thermal
performance. Otherwise ground vias should be placed
as close to the land pattern as possible.
Land Pattern / Mounting Configuration
4. Trace width depends on the PCB material.
Specifications and information are subject to change without notice
Web site: www.wj.com Page 3 of 3 March 2006
WJ Communications, Inc Phone 1-800-WJ1-4401 FAX: 408-577-6621 e-mail: sales@wj.com
WJCI [ WJ COMMUNICATION. INC. ]
