The Communications Edge TM
FP31QF
2-Watt HFET
Product Information
FP31QF-F Mechanical Information
This package is lead-free/RoHS-compliant. It is compatible with both lead-free (maximum 260 °C reflow temperature) and leaded
(maximum 245 °C reflow temperature) soldering processes. The plating material on the pins is annealed matte tin over copper.
Product Marking
Outline Drawing
The component will be lasermarked with a
“FP31FF” product label with an alphanumeric
lot code on the top surface of the package.
The obsolete tin-lead package is marked with
an “FP31QF” designator followed by an
alphanumeric lot code.
Tape and reel specifications for this part will
be located on the website in the “Application
Notes” section.
ESD / MSL Information
ESD Rating: Class 1C
Value:
Test:
Standard:
Passes ኑ1000V to <2000V
Human Body Model (HBM)
JEDEC Standard JESD22-A114
ESD Rating: Class IV
Mounting Configuration / Land Pattern
Value:
Test:
Standard:
Passes ኑ1000V
Charged Device Model (CDM)
JEDEC Standard JESD22-C101
MSL Rating: Level 2 at +260 °C convection reflow
Standard: JEDEC Standard J-STD-020
Functional Pin Layout
Pin
3
FUNCTION
Gate /RF Input
Drain / RF Output
19
The backside paddle is the Source and should be
grounded for thermal and electrical purposes. All
other pins should be grounded on the PCB.
Thermal Specifications
MTTF vs. GND Tab Temperature
100
Parameter
Rating
-40 to +85 °C
17.5 °C/W
156 °C
Operating Case Temperature
Thermal Resistance, Rth (1)
Junction Temperature, Tj (2)
10
1
1. The thermal resistance is referenced from the hottest part
of the junction to the ground copper on the backside.
2. This corresponds to the typical drain biasing
condition of +9V, 450 mA at an 85°C case
temperature. A minimum MTTF of 1 million hours is
achieved for junction temperatures below 160 °C.
0
60
70
80
90
100
110
120
Tab Temperature (°C)
Specifications and information are subject to change without notice
Page 12 of 12 October 2006
WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6621 • e-mail: sales@wj.com • Web site: www.wj.com