欢迎访问ic37.com |
会员登录 免费注册
发布采购

WSH413-XPANB 参数 Datasheet PDF下载

WSH413-XPANB图片预览
型号: WSH413-XPANB
PDF下载: 下载PDF文件 查看货源
内容描述: [Sensor/Transducer]
分类和应用:
文件页数/大小: 7 页 / 120 K
品牌: WINSON [ WINSON SEMICONDUCTOR CORP. ]
 浏览型号WSH413-XPANB的Datasheet PDF文件第2页浏览型号WSH413-XPANB的Datasheet PDF文件第3页浏览型号WSH413-XPANB的Datasheet PDF文件第4页浏览型号WSH413-XPANB的Datasheet PDF文件第5页浏览型号WSH413-XPANB的Datasheet PDF文件第6页浏览型号WSH413-XPANB的Datasheet PDF文件第7页  
WSH413  
Hall Effect Sensor IC with Thermal Lock Protection  
and Auto Restart Function  
Features:  
Operate from 2.8V to 36V supply voltage.  
On-chip Hall sensor.  
Internal bandgap regulator allows temperature compensated operations and a  
wide operating voltage range.  
High output sinking capability up to 500mA for driving large load.  
Lower current change rate reduces the peak output voltages during switching.  
Available in rugged low profile SOT-25 , SIP-4L packages.  
Built-in PWM Speed Control function .  
Built-in protection diode for reverse power supply fault.  
Built-in thermal lock protection and auto-restart function.  
General Description:  
WSH413 is designed to integrate Hall sensor with complementary output drivers and  
frequency generator together on the same chip, it is suitable for speed measurement,  
revolution counting, positioning, and DC brushless motors. It includes a temperature  
compensated voltage regulator, a differential amplifier, a Hysteresis controller, two  
Darlington output drivers capable of sinking 500mA current load and an PWM signal  
input pin capable of doing speed control. An on-chip protection diode is implemented  
to prevent reverse power fault. And built-in thermal lock protection and auto-restart  
function is suitable for super high speed fan. It can replace the function of lock  
protection and auto restart function. The power will be shutdown automatically at  
125°C to prevent the coils be damaged and auto-restart after cooling down 5~10°C  
when thermal protected was activated .  
The temperature-dependent bias increases the supply voltage of the hall plates and  
adjusts the switching points to the decreasing induction of magnets at higher  
temperatures. Subsequently, the open collector output switches to the appropriate state.  
WSH413 are rated for operation over temperature range from –20˚ C to 100˚C and  
voltage ranges from 2.8V to 36V.  
Pin Descriptions: SOT-25  
Winson reserves the right to make changes to improve reliability or manufacturability.  
©Winson, 2009/5/21