WS3413E ProductDescription
Pin Configuration and Marking Information
The WS3413E is available in SOP7/DIP7 Package,the top marking is shown as below:
WS3413ES7P
A:Product Code
X:Internal Code
BCY:Internal Code For QC
YMX:D/C
WS3413ED7P
A:Product Code
X:Internal Code
BCY:Internal Code For QC
YMX:D/C
Pin Definition
Name
Pin No.
Description
Loop Compensation Node. This pin connects a capacitor to GND for stabilization of the
control loop, achieving accurate LED current, high Power Factor and low THD.
Ground.
COMP
1
GND
VCC
2
3
Power Supply Pin. Connect a bypass capacitor from this pin to GND.
Feedback Voltage Input Pin. This pin detects the inductor demagnetization signal and the
output voltage.
FB
4
D
5/6
7
Internal HV Power MOSFET Drain.
CS
Current Sense Pin. Connect a resistor to GND to sense the inductor current.
Internal Block Diagram
WINSEMI
WINSEMI MICROELECTRONICS
Tel : +86-755-8250 6288 Fax : +86-755-8250 6299
WINSEMI MICROELECTRONICS
WINSEMI MICROELECTRONICS
WINSEMI MICROELECTRONICS
www.winsemiM.cICoRmOELECTRONICS
2/9