W78E365/W78E365A
MOV A, SFRAL
JNZ BLANK_CHECK_LOOP
INC SFRAH
MOV A, SFRAH
CJNE A, #80H, BLANK_CHECK_LOOP ; END ADDRESS = 7FFFH
JMP PROGRAM_64KROM
BLANK_CHECK_ERROR:
MOV P1, #F0H
MOV P3, #F0H
JMP $
;*******************************************************************************
;* RE-PROGRAMMING 64KB APROM BANK
;*******************************************************************************
PROGRAM_64KROM:
MOV DPTR, #0H
MOV R2, #00H
MOV R1, #00H
MOV DPTR, #0H
MOV SFRAH, R1
MOV SFRCN, #21H
MOV R6, #BEH
MOV R7, #FFH
MOV TL0, R6
; THE ADDRESS OF NEW ROM CODE
; TARGET LOW BYTE ADDRESS
; TARGET HIGH BYTE ADDRESS
; EXTERNAL SRAM BUFFER ADDRESS
; SFRAH, TARGET HIGH ADDRESS
; SFRCN(C7H) = 21 (PROGRAM 64K)
; SET TIMER FOR PROGRAMMING, ABOUT 50 μS.
MOV TH0, R7
PROG_D_64K:
MOV SFRAL, R2
MOVX A, @DPTR
; SFRAL(C4H) = LOW BYTE ADDRESS
; READ DATA FROM EXTERNAL SRAM BUFFER. BY ACCORDING USER?
; CIRCUIT, USER MUST MODIFY THIS INSTRUCTION TO FETCH CODE
; SFRFD(C6H) = DATA IN
; TCON = 10H, TR0 = 1,GO
; ENTER IDLE MODE (PRORGAMMING)
MOV SFRFD, A
MOV TCON, #10H
MOV PCON, #01H
INC DPTR
INC R2
CJNE R2, #0H, PROG_D_64K
INC R1
MOV SFRAH, R1
CJNE R1, #80H, PROG_D_64K
;*****************************************************************************
; * VERIFY 64KB APROM BANK
;*****************************************************************************
MOV R4, #03H
MOV R6, #FEH
MOV R7, #FFH
MOV TL0, R6
; ERROR COUNTER
; SET TIMER FOR READ VERIFY, ABOUT 1.5 μS.
MOV TH0, R7
MOV DPTR, #0H
MOV R2, #0H
; The start address of sample code
; Target low byte address
MOV R1, #0H
; Target high byte address
MOV SFRAH, R1
MOV SFRCN, #00H
; SFRAH, Target high address
; SFRCN = 00 (Read ROM CODE)
Publication Release Date: January 10, 2007
Revision A9
- 41 -
WINBOND [ WINBOND ]
