Mounting rail support
TSTW, TST
Material thickness 1.8 mm
TSTW
Support block
Support block for TS 15, TS 32, TS 35
and
busbars
SH 1
for TS 15
Mounting bases
Mounting bases for TS 32 and TS 35
MOFU
FM
SH 2
for TS 32, TS 35
TSTW
MB
TST
TSTW
mounting rail supports allow for sloped fitting of mount-
ing rails at an angle of 35°. Three designs are available with M5,
M6 threads or with a bore of Ø 4.3 mm.
The
TST
mounting rail support allows rails to be fitted into fram-
es or above a cut-out. This design has an M5 or M6 thread (not
shown).
Weidmüller offers hexagon socket fixing screws for the mount-
ing rail supports with a particularly low head allowing terminals
also to be fitted above the screw.
The SH 1 and SH 2 support blocks enable construction of insu-
lated mounting rails.
Mounting bases are used to fix components onto mounting
rails. Weidmüller offers a polyamide mounting base and a steel
snap-on base for the TS 35 mounting rail. The FM 4 snap on
base fits all “top-hat” mounting rails. The PA mounting base fits
the TS 35 x 7.5 and the TS 35 x 15 slotted rails.
The sliding nut for TS 32 mounting rails has 2 tapped holes for
M 3 + M 5 / M 6 + M 4 / M 5 + M 3 screws. It is used to fix
components which cannot be directly mounted on the TS 32
and, in particular, to accept the smaller TS 15 “top-hat” rail. In
this way, for example, small terminals can first be mounted on
the TS 15 and this rail can then be mounted on the TS 32 with
the aid of the sliding nut together with the terminals.
SH 2
Type
Cat. No.
Qty.
TSTW (M 5)
TSTW (M 6)
TSTW ø 4.3
TST (M 6)
TST (M 5)
TSTW (M 5), zinc-plated
Fixing screw
FKSC M 5x8 ø 9 hexagon socket SW 2.5
FKSC M 6x8 ø 9 hexagon socket SW 3
FKSC M 6x12 ø 9 hexagon socket SW 3
0178100000
0164000000
1610110000
0101700000
1286600000
1779100000
10
10
10
10
10
10
Type
Cat. No.
SH 1 for TS 15
0299860000
in PA (thermoplastics) compl.
SH 1 Base
0401460000
SH 1 Bracket
0635960000
Qty.
20
20
500
Type
Cat. No.
Qty.
FM 4 (M 4) for TS 35
FM 5 (M 5) for TS 35
FM 6 (M 6) for TS 35
FM (Ø 4.2) for TS 35
MOFU mounting foot PA orange
for TS 35 x 7.5 u. 35 x 15 gel.
0687900000
0636800000
0636900000
1724580000
0646260000
with bore
0495660000
without bore
40
40
40
40
20
20
20
20
20
0295900000
50
0642600000
50
0353500000
50
Type
SH 2 for TS 32/35
in KrG (thermosetting)
Cat. No.
0494920000
Qty.
10
MB 3/5 (cream)
0503500000
with thread M 3 and M 5, for TS 32
MB 6/4 (grey)
0334900000
with thread M 6 and M 4, for TS 32
MB 5/3 (black)
0553400000
with thread M 5 and M 3, for TS 32
261
Accessories
WEIDMULLER [ WEIDMULLER ]
