SAK-series
Weidmüller terminal - SAK-series- are pro-
ved in millions of applications for more
than 50 years.
Available for the two rail systems TS32
and TS35, the SAK terminals are useable
for every application and for all cross-sec-
tions. SAK terminals fulfill the requirements
of EN 60 947-7-1.
Cross-connection systems
SAK portfolio
40% of all terminals are cross-connected
for potential branching.
• Feed-through terminals
• Protective conductor terminals
• Fuse terminals
• Disconnect-test terminals
• Feed-through terminals with tab, solder,
WireWrap and Termi Point connections
• Initiator terminals, Actuator terminals
• Stud terminals
Weidmüller distinguishes between the fol-
lowing cross-connection units for SAK-
series:
• type Q pre-assembled cross-connec-
tions
• type QL permanent cross-connections
• type VL removeable cross-connection
straps
TS 32
TS 35
Thermosetting plastic or
Thermoplastic
Accessories
• type QS removeable cross-connection
plugs
Terminal of thermosetting plastic are nor-
mally used in applications where high con-
tinuous service temperature and high
flammability level are necessary. The
Weidmüller thermosetting plastic KRG is
very resistant against infection through
mould and micro-organisms.
Cross-connection systems from the SAK
and AKZ series, type Q, QL or VL or other
freely accessible live components, must be
protected with appropriate covers ADP 1
or 4 or TSK 31.5 as long as they are to be
inserted safe from contact.
The thermoplastic material Polyamide 66
has very good electrical and mechanical
properties upto 100°C. PA66 is flexible
and unsusceptible to fracture, even with
low temperatures.
Polyamid 66 has improved fire resistance
and is self-extinguishing with flammability
level V2 according to UL 94.
An extensive assortment of accessories is
available for Weidmüller SAK terminals:
Approvals
• Partitions
• Cover plates
• Small partitions
• Test plugs
• Test adapters
• Marking material
• Cross-connections and
• Covers
The following approvals apply to SAK ter-
minals:
a
r
#
q
UL-USA
CSA-Canada
GOST-Russia
SEV-Switzerland
KEMA-Netherlands
Lloyds Register of Shipping
Germanischer Lloyd
Det Norske Veritas
i
LR
Thermoplastic
u
DNV
Positioning of end plates or partitions between cross-connections
Thermosetting
plastic
Operating voltage
Terminal width (in mm)
3 6
3 8
10
12
18
22
125 V ~
250 V ~
380 V ~
440 V ~
500 V ~
660 V ~
750 V ~
AP
AP
AP
TW
TW
TW
TW
–
–
–
–
–
AP
AP
TW
TW
–
–
–
AP
AP
TW
TW
–
–
–
AP
AP
TW
TW
–
–
–
–
–
AP
AP
AP
AP
TW
TW
TW
In PA terminals small partitions (TSch) have to be used up to 380 V.
125
WEIDMULLER [ WEIDMULLER ]
