MIL-HDBK-103AJ
1.
SCOPE
1.1 Purpose. The Standard Microcircuit Drawing Program (SMDP) is directly under the auspices of the
DoD Parts Management Program (PMP). The PMP is implemented by MIL-HDBK-512, "Parts Management." The PMP
will be the avenue for screening candidate parts for the SMDP by the DLA Land and Maritime Military Parts
Control Advisory Group (MPCAG).
1.2 Part or Identifying number (PIN). The PIN's listed in section 1, part I, are composed of the
elements shown in the following example (see 1.2.2 for one part - one part number differentiation):
One part - one part number PIN
5962-90123
Drawing number
(1.2.1)
01
Device
Type
M
Device
Class
Designator
(1.2.2)
X
Case
Outline
(1.2.3)
A
Lead
Finish
(1.2.3)
Non - one part - one part number PIN
86030
or
5962-88668
Drawing number
01
Device type
X
Case outline
(1.2.3)
A
Lead finish
(1.2.3)
1.2.1 Drawing number. One part - one part number SMD's for device classes Q, V, H, and K may cover
custom device products which are generally used to specify application specific integrated circuits
(both monolithic and hybrid). To differentiate between one part - one part number SMD's that cover
standard product from custom product a single alpha character will be placed in the unique 3 digit
portion of the SMD drawing number as in the following example: 5962-90A23. This will be the only
change to the SMD PIN for custom products.
1.2.2 Device class designator. One part - one part number SMD's (fully implemented after SMD
5962-90659) contain device requirements for all three of the major military microcircuit requirements
documents. By establishing a one part number system covering all three documents, the OEM can acquire
to the highest level available for a given generic device to meet system needs without modifying the
original contract parts selection criteria.
Military documentation format
New MIL-PRF-38535 Standard
Microcircuit Drawings
New MIL-PRF-38534 Standard
Microcircuit Drawings
New 1.2.1 of MIL-STD-883 Standard
Microcircuit Drawings, based on
Appendix A of MIL-PRF-38535
Example PIN
5962-XXXXXZZ(Q,V,T or N)YY
5962-XXXXXZZ(H,K,D,G or E)YY
5962-XXXXXZZ(M)YY
Manufacturing
source listing
QML-38535
QML-38534
MIL-HDBK-103
Document
listing
MIL-HDBK-103
MIL-HDBK-103
MIL-HDBK-103
1.2.3 Case outline/lead finish. Case outline and lead finish are as described in each SMD. The lead
finish indicated in the section 1 Part I listing is the most readily available from the manufacturer
listed for the part. The manufacturer is authorized to supply other lead finishes than what is listed
provided that further testing/qualification is performed by the manufacturer on the other lead finish(es).
The user needs to contact the manufacturer to determine the availability of other lead finishes not listed
herein.
1.2.4
Substitutability.
Device-class-Q devices will replace device-class-M devices.
This handbook is for guidance only and cannot be cited as a requirement.
1
WEDC [ WHITE ELECTRONIC DESIGNS CORPORATION ]
