VITESSE
SEMICONDUCTOR CORPORATION
Advance Product Information
2.488Gb/s SONET/SDH
STS-48/STM-16 Section Terminator
VSC8151
Absolute Maximum Ratings
Power Supply Voltage (VCC) Potential to GND ............................................................................-0.5 V to +4.3 V
Power Supply Voltage (VMM) Potential to GND ...........................................................................-0.5 V to +3.0 V
TTL Input Voltage Applied ..........................................................................................................-0.5 V to + 5.5V
ECL Input Voltage Applied ...................................................................................................+0.5 V to VTT -0.5 V
Output Current (IOUT)................................................................................................................................... 50 mA
o
o
Case Temperature Under Bias (TC)................................................................................................-55 to + 125 C
o
o
Storage Temperature (TSTG) ...........................................................................................................-65 to + 150 C
Note: Caution: Stresses listed under “Absolute Maximum Ratings” may be applied to devices one at a time without causing per-
manent damage. Functionality at or exceeding the values listed is not implied. Exposure to these values for extended
periods may affect device reliability.
Recommended Operating Conditions
Power Supply Voltages (VCC)...............................................................................................................+3.3V ±5 %
Power Supply Voltages (VMM)..............................................................................................................+2.0V ±5 %
o
o
Commercial Operating Temperature Range* (T).................................................................................. 0 to 85 C
Notes: (1)Lower limit of specification is ambient temperature and upper limit is case temperature.
(2)Customer must use air cooled/heatsink environment to meet thermal requirements of the package.
(3)Suggested power up of 8151 is +2.0V supply first, then +3.3V supply.
ESD Ratings
Proper ESD procedures should be used when handling this product. The VSC8151 is rated to the following
ESD voltages based on the human body model:
1. All pins are rated at or above 1500V.
G52225-0, Rev. 2.9
VITESSE SEMICONDUCTOR CORPORATION
Page 21
12/1/99
741 Calle Plano, Camarillo, CA 93012 • 805/388-3700 • FAX: 805/987-5896
VITESSE [ VITESSE SEMICONDUCTOR CORPORATION ]
