VSC8113
Data Sheet
ATM/SONET/SDH 622Mb/s or 155Mb/s Transceiver Mux/Demux
with Integrated Clock Generation and Clock Recovery
F
EATURES
G
Operates at either STS-3/STM-1 (155.52Mb/s) or
STS-12/STM-4 (622.08Mb/s) Data Rates
Compatible with Industry ATM UNI Devices
On-Chip Clock Generation of the 155.52MHz
or 622.08MHz High-Speed Clock (Mux)
On-Chip Clock Recovery of the 155.52MHz or
622.08MHz High-Speed Clock (Demux)
8-Bit Parallel TTL Interface
SONET/SDH Frame Recovery
Lock Detect for Both CRU and CMU
G
G
G
Loss of Signal (LOS) Input and LOS Detection
+3.3V/+5V Programmable PECL Serial Interface
Provides Equipment, Facilities, Split Loopback
and Loop Timing Modes
Provides TTL and PECL Reference Clock Inputs
Meets Bellcore, ITU and ANSI Specifications for
Jitter Performance
Low Power: 1W Typical
100-Pin PQFP Package
G
G
G
G
G
G
G
G
G
G
G
ENERAL
D
ESCRIPTION
The VSC8113 is an ATM/SONET/SDH-compatible transceiver integrating an on-chip Clock Multiplication Unit
(CMU) for the high-speed clock as well as a Clock and Data Recovery (CDR) unit with 8-bit serial-to-parallel and
parallel-to-serial data conversion. The Phase-Locked Loop (PLL) clock is used for serialization in the transmit
direction (Mux). The recovered clock is used for deserialization in the receive direction (Demux). The demultiplexer
contains SONET/SDH frame detection and recovery. The device provides both facility and equipment loopback
modes and two loop timing modes. The VSC8113 is packaged in a 100-pin PQFP with integrated heat spreader for
optimum thermal performance and reduced cost. The VSC8113 provides an integrated solution for ATM physical
layers and SONET/SDH systems applications.
G52154, Rev 4.7
5/16/03
©
VITESSE SEMICONDUCTOR CORPORATION
• 741 Calle Plano • Camarillo, CA 93012
Tel: (800) VITESSE • FAX: (805) 987-5896 • Email: prodinfo@vitesse.com
Internet: www.vitesse.com
1 of 22