BCM4414xD1E13A3yzz
Application Characteristics (Cont.)
Temperature controlled via pin-side side cold plate, unless otherwise noted. All data presented in this section are collected from units processing power in the
forward direction (high-voltage side to low-voltage side). See associated figures for general trend data.
Figure 14 — Full-load LO-side voltage ripple, 10µF CHI_IN_EXT
;
Figure 15 — 0 – 125A transient response:
CHI_IN_EXT = 10µF, no external CLO_OUT_EXT
no external CLO_OUT_EXT Board-mounted module,
.
scope setting: 20MHz analog BW
Figure 16 — 125 – 0A transient response:
Figure 17 — Start up from application of VHI_DC = 384V, 25% ILO_DC,
CHI_IN_EXT = 10µF, no external CLO_OUT_EXT
100% CLO_OUT_EXT
Figure 18 — Start up from application of OPERATION COMMAND
with pre-applied VHI_DC = 384V, 25% ILO_DC
,
100% CLO_OUT_EXT
BCM® in a VIA™ Package
Page 16 of 43
Rev 1.3
08/2020
VICOR [ VICOR CORPORATION ]
