78MXX
APPLICATION CIRCUIT
V
IN
Vo
UT
1
LINEAR INTEGRATED CIRCUIT
UTC78MXX
2
3
C1
0.33µF
C0
0.1µF
Note 1: To specify an output voltage, substitute voltage value for "MXX".
Note 2: Bypass capacitors are recommended for optimum stability and transient response and should be located
as close as possible to the regulators.
UTC assumes no responsibility for equipm ent failures that result from using products at values that
exceed, even mom entarily, rated values (such as m aximum ratings, operating condition ranges, or
other param eters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or system s where
m alfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The inform ation
presented in this docum ent does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
8 of 8
QW-R101-004,F
UTC-IC [ UNISONIC TECHNOLOGIES ]
