12-27GHz Detector
Notes
100kΩ
Ω
CHE1260-QAG
Vref_R DC_R Vdet_R
100kΩ
Ω
RF_in
RF_in
RF_out
RF_out
100kΩ
Ω
Vdet_I DC_I
Vref_I
100kΩ
Ω
Recommended external resistors assembly
100kΩ resistors in parallel with Vdet_I, Vref_I, Vdet_R and Vref_R pads are recommended to
provide the best behaviour in the whole operating temperature range.
As the voltage detection is the difference between Vref_X and Vdet_X (X= I or R), the
external resistor value should be identical on these ports.
For information, a variation of 2% leads around 1mV variation of detected voltage.
ESD protections are implemented on Vdet_I, Vref_I, Vdet_R and Vref_R accesses.
The DC connections (DC_R & DC_I) do not include any decoupling capacitor in package,
therefore it is mandatory to provide a good external DC decoupling on the PC board, as
close as possible to the package.
Ref: DSCHE1260-QAG8057 - 22 Feb 08
9/10
Specifications subject to change without notice
Route Départementale 128, B.P.46 - 91401 ORSAY Cedex - FRANCE
Tel.: +33 (0) 1 69 33 03 08 - Fax: +33 (0) 1 69 33 03 09