CHA3513
RoHS COMPLIANT
6-18GHz 3 bit Digital Variable Amplifier
GaAs Monolithic Microwave IC
Description
The CHA3513 is composed by a three steps
digital attenuator followed by a three stage
travelling amplifier and a Single Pole Single
Through (SPST) switch. It is designed for
defense applications. The backside of the chip
is both RF and DC grounded. This helps to
simplify the assembly process.
The circuit is manufactured with a PM-HEMT
process, 0.25µm gate length, via holes through
the substrate, air bridges and electron beam
gate lithography.
It is available in chip form.
10A
5A
10A1
B C F
G
RF
RF
IN
10dB
5dB
10dB
OUT
10B
5B
10B1
A D E
H
Typical on wafer Measurements
Gain versus attenuation states
Main Features
¦
Performances : 6-18GHz
¦
20dBm saturated output power
¦
16 dB gain
¦
3 bit attenuator for 26dB range
¦
DC power consumption, 300mA @ 4.5V
¦
Chip size : 6.68 x 2.46 x 0.1 mm
Main Characteristics
Tamb. = 25°C
Symbol
Fop
G
Psat
ATT dyn
Parameter
Operating frequency range
Small signal gain @ Attenuator state 0dB
Saturated Output power @ Attenuator state 0dB
Attenuator range with 3bit
Min
6
Typ
Max
18
Unit
GHz
dB
dBm
dB
16
20
25
ESD Protection : Electrostatic discharge sensitive device. Observe handling precautions !
Ref. : DSCHA35136216 - 04 Aug 06
1/10
Specifications subject to change without notice
United Monolithic Semiconductors S.A.S.
Route Départementale 128 - B.P.46 - 91401 Orsay Cedex France
Tel. : +33 (0)1 69 33 03 08 - Fax : +33 (0)1 69 33 03 09