CAM-M8 - Data Sheet
9 Labeling and ordering information
9.1 Product labeling
The labeling of u-blox CAM-M8Q/C GNSS antenna modules include important product information.
The location of the product type number is shown in Figure 7.
Figure 7: Location of product type number on u-blox CAM-M8Q/C module label
9.2 Explanation of codes
Three different product code formats are used. The Product Name is used in documentation such as
this data sheet and identifies all u-blox products, independent of packaging and quality grade. The
Ordering Code includes options and quality, while the Type Number includes the hardware and
firmware versions. Table 11 below details these three different formats:
Format
Structure
Product Name
Ordering Code
Type Number
PPP-TGV
PPP-TGV-N
PPP-TGV-N-XX
Table 11: Product code formats
The parts of the product code are explained in Table 12.
Code
PPP
TG
V
Meaning
Example
Product Family
Technology & Generation
Variant
CAM
M8 = u-blox M8
Function set (A-Z), T = Timing, R = DR, etc.
N
Option / Quality Grade
Describes standardized functional element or quality grade
0 = Default variant, A = Automotive
XX
Product Detail
Describes product details or options such as hardware and
software revision, cable length, etc.
Table 12: Part identification code
9.3 Ordering codes
Ordering No.
Product
CAM-M8Q-0
u-blox M8 Concurrent GNSS LCC Antenna Module, TCXO, SAW, LNA, ROM, 9.6 x 14.0 mm, 500
pcs/reel
CAM-M8C-0
u-blox M8 Concurrent GNSS LCC Antenna Module, Crystal, SAW, LNA, ROM, 9.6 x 14.0 mm, 500
pcs/reel
Table 13: Product ordering codes for professional grade module
☞
Product changes affecting form, fit or function are documented by u-blox. For a list of Product
Change Notifications (PCNs), see our website.
UBX-15031574 - R04
Production Information
Labeling and ordering information
Page 28 of 31
U-BLOX [ u-blox AG ]
