TD110 SERIES
DC/DC CONVERTERS
OUTPUT VOLTAGE/CURRENT RATING CHART
Maximum
Output #1
Output #2 (1)
Output #3
Output #4
Output
Product # (3)
Vnom. Imin. Imax. Tol. Vnom. Imin. Imax. Ipeak Tol. Vnom. Imin. Imax. Tol.
Vnom. Imin. Imax. Tol.
Power (2)
TD110-S05
TD110-S12
TD110-S15
TD110-S24
TD110-S30
TD110-D23
TD110-T31
TD110-T32
TD110-Q40
TD110-Q41
TD110-Q42
TD110-Q45-1
TD110-Q45-2
TD110-Q46
5V
12V
15V
24V
30V
0A 22A 3%
0A 9.0A 2%
0A 7.5A 2%
0A 4.5A 2%
0A 3.6A 2%
(N/A)
(N/A)
(N/A)
(N/A)
(N/A)
(N/A)
(N/A)
(N/A)
(N/A)
(N/A)
(N/A)
(N/A)
(N/A)
(N/A)
(N/A)
(N/A)
(N/A)
(N/A)
(N/A)
110W
110W
110W
110W
110W
110W
110W
110W
110W
110W
110W
110W
110W
110W
+5V 0.8A 10A 3%
+5V 0.8A 10A 3%
+5V 0.8A 10A 3%
+5V 0.8A 10A 3%
+5V 0.8A 10A 3%
+5V 0.8A 10A 3%
+5V 0.8A 10A 3%
+5V 0.8A 10A 3%
+5V 0.8A 10A 3%
+12V
+12V
+15V
+12V
+15V
+12V
+12V
+24V
+15V
0A
0A
0A
0A
0A
0A
0A
0A
0A
5A 9.0A 3%
5A 9.0A 3%
4A 7.5A 3%
5A 9.0A 3%
4A 7.5A 3%
5A 9.0A 3%
5A 9.0A 3%
3A 5.0A 3%
4A 7.5A 3%
-12V
-15V
-12V
-15V
-12V
-12V
-12V
-15V
0A
1A 4%
1A 4%
1A 4%
1A 4%
1A 4%
1A 4%
1A 4%
1A 4%
0A
0A
0A
0A
0A
0A
0A
-5V
+24V
+12V
+24V
+12V
-5V
0A
0A
0A
1A
1A
1A
4%
4%
4%
10%
4%
4%
0A 1.5A
0A
0A
1A
1A
Notes: (1) Peak output current with 10% maximum duty cycle for less than 60 seconds.
(2) TD110”M” & “H” series are suitable only for 110 watts maximum at 20 CFM forced air cooling or 80 watts maximum at
convection cooling. TD110”L” series are suitable only for 90 watts maximum at 20 CFM forced air cooling or 70 watts
maximum at convection cooling.
(3) Suffix codes for input range, mechanical format and connector are as follows. TD110-X1X2X3X4X5, “X1X2” is the model
code from the above table, “X3” is the input range (L=10-20 VDC, M=18-36 VDC, H=36-72 VDC), “X4” is the mechanical
format (Blank=PCB, B=L-bracket, C=enclosed) and “X5” is the input and output connector code (Blank=Molex KK type,
T=miniature terminal block), e.g. TD110-31MCT (18-36 VDC input range, enclosed format and miniature terminal blocks).
MECHANICAL SPECIFICATIONS
NOTES:
1. Dimensions shown in inch [mm]
2. Tolerance 0.02 [0.5] maximum
3. Molex KK type connectors:
Input connector mates with Molex housing
09-50-3051 and Molex 2878 series crimp
terminal.
Output connector mates with Molex housing
09-50-3131 and Molex 2878 series crimp
terminal.
4. Miniature terminal blocks:
Input terminals allow wires up to 2mm2 (AWG
#14).
Output terminals allow wires up to 2mm2 (AWG
#14).
5. Weight: 640grams (PCB format)
6. Refer to the last page for mechanical details on
L-bracket and enclosed formats.
PIN CHART
MINI. TERMINAL
1
2
3
4
5
6
MOLEX
CONNECTOR
PRODUCT NO.
1,2,3
4,5
6,7
8,9
10
11
12
13
TD110-S05 TD110-12
TD110-S15 TD110-24
TD110-S30
OUTPUT
#1
OUTPUT
#1
RETURN RETURN
N.C.
N.C.
N.C.
KEY
N.C.
TD110-D23
OUTPUT COMMON COMMON OUTPUT
#1 RETURN RETURN #2
OUTPUT COMMON COMMON OUTPUT
#1 RETURN RETURN #2
N.C.
N.C.
KEY
KEY
N.C.
N.C.
TD110-T31 TD110-T32
OUTPUT
#3
TD110-Q40 TD110-Q41
TD110-Q42 TD110-Q45-1
TD110-Q45-2 TD110-Q46
OUTPUT COMMON COMMON OUTPUT
#1 RETURN RETURN #2
OUTPUT
#3
OUTPUT
#4
N.C.
KEY
Tumbler Technologies + TRUMPower
3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA
Phone: 408-988-6616 ● sales@trumpower.com ● www.TRUMPower.com