P6KE SERIES
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE - 6.8 TO 440 Volts
600Watt Peak Power
5.0 Watt Steady State
FEATURES
DO-15
l
Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
l
l
l
l
l
Glass passivated chip junction in DO-15 package
600W surge capability at 1ms
Excellent clamping capability
Low zener impedance
Fast response time: typically less
than 1.0 ps from 0 volts to BV min
l
l
Typical IR less than 1 A above 10V
High temperature soldering guaranteed:
260 /10 seconds/.375”,(9.5mm) lead
length/5lbs., (2.3kg) tension
MECHANICAL DATA
Case: JEDEC DO-15 molded plastic
Terminals: Axial leads, solderable per
MIL-STD-202, Method 208
Polarity: Color band denoted cathode
except Bipolar
Mounting Position: Any
Weight: 0.015 ounce, 0.4 gram
DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use C or CA Suffix for types P6KE6.8 thru types P6KE440
Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
RATING
SYMBOL
PPK
VALUE
Minimum 600
5.0
UNITS
Watts
Watts
Peak Power Dissipation at TA=25 , TP=1ms(Note 1)
Steady State Power Dissipation at TL=75 Lead Lengths
.375”,(9.5mm) (Note 2)
PD
Peak Forward Surge Current, 8.3ms Single Half Sine-Wave
Superimposed on Rated Load(JECED Method) (Note 3)
Operating and Storage Temperature Range
IFSM
100
Amps
TJ,TSTG
-65 to +175
TRSYS [ TRANSYS Electronics Limited ]
