DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use C or CA Suffix for types
Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified.
RATING
SYMBOL
PPPM
VALUE
Minimum 5000
UNITS
Watts
Peak Pulse Power Dissipation on 10/1000 S waveform
(Note 1, FIG.1)
Peak Pulse Current on 10/1000 S waveform
(Note 1, FIG.3)
Steady State Power Dissipation at TL=75 Lead Lengths
.375”,(9.5mm) (Note 2)
Peak Forward Surge Current, 8.3ms Single Half Sine-Wave
Superimposed on Rated Load, (JECED Method) (Note 3)
Operating Junction and Storage Temperature Range
IPPM
PM(AV)
IFSM
SEE TABLE 1
8.0
Amps
Watts
Amps
400
TJ,TSTG
-55 to +175
NOTES:
1.Non-repetitive current pulse, per Fig. 3 and derated above TA=25 per Fig. 2.
2.Mounted on Copper Leaf area of 0.79in2(20mm2).
3.Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle= 4 pulses per minutes maximum.
RATING AND CHARACTERISTIC CURVES 5KP SERIES
Fig. 1-PEAK PULSE POWER RATING CURVE
Fig. 2-PULSE DERATING CURVE