885062
2.4 GHz WLAN/BT LTE Co-Existence Filter
Electrical Specifications (1)
Conditions unless otherwise noted: Device Temperature = -40°C to +95°C.
Parameter (2)
Conditions
Min Typ (+25°C) Max Units
2402.5 – 2421.5 MHz (WiFi Ch.1)
2407.5 – 2426.5 MHz (WiFi Ch.2)
2412.5 – 2471.5 MHz (WiFi Ch.3-11)
2457.5 – 2476.5 MHz (WiFi Ch.12)
2462.5 – 2481.5 MHz (WiFi Ch.13)
2402.5 – 2421.5 MHz (WiFi Ch.1)
2407.5 – 2426.5 MHz (WiFi Ch.2)
2412.5 – 2471.5 MHz (WiFi Ch.3-11)
2457.5 – 2476.5 MHz (WiFi Ch.12)
2462.5 – 2481.5 MHz (WiFi Ch.13)
2402.5 – 2481.5 MHz (WiFi Ch.1-13)
1.7
1.5
1.5
1.6
1.7
0.8
0.8
0.9
0.4
0.6
1.9
160
37
53
58
61
61
49
49
41
41
2.2
2.0
2.1
2.2
2.4
1.8
1.1
1.1
1.0
1.8
2.2
200
-
Insertion Loss (3)
-
dB
Amplitude Variation
Input/Output VSWR
-
dB
-
-
-
Impulse Response Length (4) 2401 – 2483 MHz
100 – 2300 MHz
ns
dB
dB
dB
35
48
54
43
56
23
34
29
18
49
35
45
44
38
36
-
2300 – 2365 MHz (5)
-
-
2365 – 2370 MHz (5)
2370 – 2375 MHz (+25 to +95˚C) (5)
-
-
-
-
dB
dB
dB
dB
2370 – 2375 MHz (-40 to +25˚C) (5)
2375 – 2380 MHz (+25 to +95˚C) (5)
2375 – 2380 MHz (-40 to +25˚C) (5)
2500 – 2505 MHz (+25 to +95˚C) (5)
2500 – 2505 MHz (-40 to +25˚C) (5)
2505 – 2570 MHz (+25 to +95˚C) (5)
2505 – 2570 MHz (-40 to +25˚C) (5)
2570 – 2620 MHz (5)
Attenuation
55
55
48
46
43
40
60
138
-
-
-
-
-
-
dB
dB
dB
dB
dBc
dBc
2620 – 2690 MHz (5)
4800 – 5000 MHz
7200 – 7500 MHz
CW Tone = 2442 MHz @ 22.5 dBm
CW Tone = 2442 MHz @ 22.5 dBm
2nd Harmonics
3rd Harmonics
Notes:
-
1. In production, devices will be tested at room temperature to a guard-banded specification to ensure electrical compliance
over temperature.
2. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing
tolerances.
3. Data is the integrated value of the linear s-parameter over the indicated band at the specified temperature.
4. Duration in ns between the maxima and the point 40 dB below the maxima.
5. Data is the integrated value of the linear s-parameter over 5 MHz range at the specified temperature.
6. An external impedance matching network with 2 % tolerance will be necessary to achieve the stated specifications.
7. This is the optimum impedance in order to achieve the performance shown.
Data Sheet: Rev G 02/10/15
Disclaimer: Subject to change without notice
- 3 of 8 -
© 2015 TriQuint
TRIQUINT [ TRIQUINT SEMICONDUCTOR ]
