TMCM-3314, TMCM-3315 Hardware Manual (V0.92 / 2016-SEP-20)
4 Mechanical and Electrical Interfacing
4.1 Dimensions and Mounting Holes
6
The dimensions of the TMCM-3314 and TMCM-3315 controller/driver board are approx. 280mm x 100mm x 21mm.
Maximum component height (height above PCB level) without mating connectors is around 17mm above PCB
level and 2mm below PCB level. There are 12 mounting holes for M3 screws (3.2mm diameter) altogether for
mounting the PCB.
Figure 4.1 Dimension of TMCM-3314 / TMCM-3315 and position of mounting holes
Please note: TMCM-3314 and TMCM-3315 share the same PCB with different assembly options regarding the
interface section. Dimensions, mounting holes and board mounting considerations (see chapter below) are the
same for both boards.
Copyright © 2016, TRINAMIC Motion Control GmbH & Co. KG
TRINAMIC [ TRINAMIC MOTION CONTROL GMBH & CO. KG. ]
