Switchmode/High Frequency
Toroidal Inductor
Description:
The FIT44-2 toroidal inductor is specifically designed to minimize transients.
It stores energy and therefore, conditions the output signal by leveling the current
waveform providing a more stable current supply. Generally used in high frequency
circuits, its standard design provides an economical solution in differential mode
applications or as an output inductor.
Electrical Specifications (@25C):
Min. Inductance (µH)
No Bias
14.75
At Bias
9.82
Rated
DC Amps
3.4
Max
DCR (mΩ)
30.7
C
Note:
No Bias inductance measured at .25V, 10KHZ.
F
G (DIA.)
Dimensions:
A
.625
B
.350
C
.700
D
.250
E
.350
F
.125
G
.022±.003
B
A
Units: In inches
Weight:
.008 lbs.
E
Technical Notes:
1. Nominal inductance values are typically 10% higher than minimal rating.
2. Biased inductance measured at rated DC amps.
3. Operation at rated current yields approximately 40°C temperature rise
over 20°C ambient.
LEADS TINNED TO
MTG SURFACE MIN.
D
RoHS Compliance:
As of manufacturing date February 2005, all standard products
meet the requirements of 2011/65/EU, known as the RoHS initiative.
.
*Upon printing, this document is considered “uncontrolled”. Please contact Triad Magnetics
website for the most current version.
For soldering and washing information please see
http://www.triadmagnetics.com/faq.html
Web: www.TriadMagnetics.com
Phone 951-277-0757
Fax 951-277-2757
460 Harley Knox Blvd.
Perris, California 92571
Publish Date: June 7, 2016
TRIAD [ TRIAD MAGNETICS ]
