欢迎访问ic37.com |
会员登录 免费注册
发布采购

TS256MCF100I 参数 Datasheet PDF下载

TS256MCF100I图片预览
型号: TS256MCF100I
PDF下载: 下载PDF文件 查看货源
内容描述: 工业用CF卡 [Industrial CF Card]
分类和应用:
文件页数/大小: 80 页 / 3420 K
品牌: TRANSCEND [ TRANSCEND INFORMATION. INC. ]
 浏览型号TS256MCF100I的Datasheet PDF文件第2页浏览型号TS256MCF100I的Datasheet PDF文件第3页浏览型号TS256MCF100I的Datasheet PDF文件第4页浏览型号TS256MCF100I的Datasheet PDF文件第5页浏览型号TS256MCF100I的Datasheet PDF文件第7页浏览型号TS256MCF100I的Datasheet PDF文件第8页浏览型号TS256MCF100I的Datasheet PDF文件第9页浏览型号TS256MCF100I的Datasheet PDF文件第10页  
Transcend I
I
ndustri
i
al
l
CF Card
Transcend ndustr a CF Card
(TS128M ~ 16GCF100I
I
)
(TS128M ~ 16GCF100 )
Note: 1) These signals are required only for 16 bit accesses and not required when installed in 8 bit
systems. Devices should allow for 3-state signals not to consume current.
2) The signal should be grounded by the host.
3) The signal should be tied to VCC by the host.
4) The mode is required for CompactFlash Storage Cards.
5) The -CSEL signal is ignored by the card in PC Card modes. However, because it is not
pulled upon the card in these modes, it should not be left floating by the host in PC Card
modes. In these modes, the pin should be connected by the host to PC Card A25 or
grounded by the host.
6) If DMA operations are not used, the signal should be held high or tied to VCC by the host. For
proper operation in older hosts: while DMA operations are not active, the card shall ignore
this signal,including a floating condition
7) Signal usage in True IDE Mode except when Ultra DMA mode protocol is active.
8) Signal usage in True IDE Mode when Ultra DMA mode protocol DMA Write is active.
9) Signal usage in True IDE Mode when Ultra DMA mode protocol DMA Read is active.
10) Signal usage in PC Card I/O and Memory Mode when Ultra DMA mode protocol DMA Write is active.
11) Signal usage in PC Card I/O and Memory Mode when Ultra DMA mode protocol DMA Read is active.
12) Signal usage in PC Card I/O and Memory Mode when Ultra DMA protocol is active.
Transcend Information Inc.
6
V1.2