DC/DC Converter
TED Series
2 Watt
Input Specifications
Input current no load
5 Vin models:
12 Vin models:
24 Vin models:
5 Vin models:
12 Vin models:
24 Vin models:
140 mA typ.
25 mA typ.
15 mA typ.
650 mA typ.
255 mA typ.
125 mA typ.
Pi-Filter
Input current full load
Input filter
Output Specifications
Voltage set accuracy
Regulation
– Input variation Vin min. to Vin max.
– Load variation 10 – 90 %: single output:
dual output:
±2%
± 0.5 % max.
± 1.0 % max.
± 2.0 % max.
80 mVpk-pk max.
± 0.05 % / °C
continuous
2200 µF max.
2200 µF max.
Ripple and noise
(20 MHz Bandwidth)
Temperature coefficient
Short circuit protection
Capacitive load
– Single output models
– Dual output models
General Specifications
Temperature ranges
– Operating
– Case
– Storage
– 25 °C ... +75 °C
+ 95 °C
– 40 °C ... +115 °C
95 % rel H max.
>1’000’000 h @ 25 °C
500 VDC
500 VDC
500 VDC
500 VDC
(dual output)
470 pF typ.
>1‘000 M Ohm
200 – 750 KHz (depending on load)
Humidity
(non condensing)
Reliability, calculated MTBF
(MIL-HDBK-217 E)
Isolation voltage
–
–
–
–
Input/Output
Input/Case
Output/Case
Output/Output
Isolation capacity
Isolation resistance
Switching frequency
– Input/Output
– Input/Output
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
www.tracopower.com
Page 2