ULN2803,04APG/AFWG
8.
t
ON
, t
OFF
Note 1: Pulse Width 50 µs, Duty Cycle 10%
Output Impedance 50
Ω,
t
r
≤
5 ns, t
f
≤
10 ns
Note 2: See below.
Input Condition
Type Number
ULN2803A
ULN2804A
R1
0Ω
0Ω
V
IH
3V
8V
Note 3: C
L
includes probe and jig capacitance
Precautions for Using
This IC does not integrate protection circuits such as overcurrent and overvoltage protectors.
Thus, if excess current or voltage is applied to the IC, the IC may be damaged. Please design the IC so that
excess current or voltage will not be applied to the IC.
Utmost care is necessary in the design of the output line, COMMON and GND line since IC may be destroyed
due to short−circuit between outputs, air contamination fault, or fault by improper grounding.
6
2006-02-15
TOSHIBA [ TOSHIBA SEMICONDUCTOR ]
