Accessory Tools
Expendable and optional hardware items for the development system are collectively referred to as accessory tools.
•
•
•
•
•
•
•
•
MCU probe
Probe set
QFP adaptor
Pin protector
Package converter
MCU mount adaptors
Communication cable
Connector
♦
To provide versatility, the footprint pattern of the QFP adaptor leads is slightly different from that of an MCU. If there is a need to install both the QFP adaptor and the MCU with
an identical footprint, the board must be designed to be compatible with both of them.
♦
♦
Before beginning a board design or purchasing these accessory tools, be sure to check the latest product specification, recommended footprints, etc. with each manufacturer.
Other than those listed below, accessory tools that can be used together with the Toshiba products are available from Tokyo Eletech Corporation. Please visit Tokyo Eletech
Corporation’s website for more details.
Adlinks Corp.
http://www.adlinks.co.jp
Emulation Technology Inc.
Samtec Inc.
http://www.emulation.com
http://www.samtec.com
Tokyo Eletech Corp.
Tyco Electronics Corp.
Yamaichi Electronics Co., Ltd.
http://www.tetc.co.jp/e-index.htm
http://www.tycoelectronics.com
http://www.yamaichi.co.jp/index_e.shtml
Spare Parts from Toshiba
The TLC-870/C model 15 target connection boards, MCU probes and package converters whose part numbers begin with “PN12” come with a QFP adaptor and a pin protector. When
you purchase additional QFP adaptors or pin protectors, check their part numbers in the following Spare Parts table.
For information about spare parts for third-party accessory tools, please contact the manufacturer or distributor of each product.
♦
♦
Note that if you are using a package converter, use spare parts for package converters, not those for MCU probes.
QFP adaptors and pin protectors are available from Tokyo Eletech and Toshiba.
Target Connection Board Spare Parts
Spare Part
QFP Adaptor *1
Pin Protector *2
Part Number
Target MCU Package
Tokyo Eletech
(QFP Socket)
Tokyo Eletech
Toshiba *3
Toshiba
(Emulator Connector)
BMP86D044DE0A
BMP86D044DE1A
BMP86D064DE0A
BMP86D064DG0A
BMP86D080DG0A
BMP86D080DG1A
BMP86D080FE0A
BMP86D100DG0A
BMP86D100FF0A
LQFP44 (10 x 10)
PN210019
TQPACK044SA
PN210021
TQSOCKET044SAG
QFP64 (14 x 14)
LQFP64 (10 x 10)
PN210025
PN210031
TQPACK064SA
TQPACK064SD
PN210027
PN210032
TQSOCKET064SAG
TQSOCKET064SDG
LQFP80 (12 x 12)
PN210007
TQPACK080SD
PN210009
TQSOCKET080SDG
QFP80 (14 x 20)
LQFP100 (14 x 14)
QFP100 (14 x 20)
PN210001
PN210022
PN210004
TQPACK080RA
TQPACK100SD
TQPACK100RB
PN210003
PN210024
PN210006
TQSOCKET080RAG
TQSOCKET100SDG
TQSOCKET100RBG
*1: QFP adaptors and QFP Sockets connectors are soldered onto the pc board of the target system. Once soldered, they should not be unsoldered from the pc board and resoldered.
*2: Pin protectors are sockets used to protect the target connection boards for QFPs and the pins of QFP adaptors and QFP Sockets. Be sure to use a pin protector to protect the portion where the target connection
board is connected. It is recommended to replace the pin protector or the emulator Connectors after 100 attachments and detachments.
*3: For the recommended footprints pattern, please visit Tokyo Eletech Corporation’s website.
•
Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
ꢃ0
TOSHIBA [ TOSHIBA ]
