TX49 Family
Hardware Products
Target MPU
Part Number
Reference Board
Functions
These are reference boards for evaluating the TMPR4951 and TMPR 4955 respectively. Since both the TMPR4951 and TMPR 4955 have the
SysAD Bus interface, the same board can be used for evaluation; the RBTX4951 and RBTX4955 simply come with different CPUs.
These reference boards have a system controller (SysAD bridge), a NOR flash ROM, a DIMM DRAM, an SIO, an Ethernet controller, an I/O
controller, and an EEPROM and an RTC connected to the SPI. Also, the reference boards provide an EJTAG connector, a ROM emulator
connector and an expansion connector.
TMPR4951BFG-200
RBHMA4601(CE)
RBTX4951
TMPR4955CFG-400
RBTX4955
RBHMA4605(CE)
TMPR4925XBG-200
RBHMA4300(CE)
TMPR4937XBG-300/333
RBHMA4400(CE)
This is a PCI-card-compliant reference board for evaluating the TMPR4925. This board has a CPU, a flash ROM, an SDRAM, a PCI controller,
an Ethernet controller, an SIO interface, and PCMCIA and SmartMediaTM card slots. It also provides an expansion connector.
RBTX4925
RBTX4937
This is a PCI-card-compliant reference board for evaluating the TMPR4937. This board has a CPU, a flash ROM, an SDRAM, an Ethernet
controller and an SIO interface. It also provides a connector that can be connected to an external AC’97 board.
This is a PCI-card-compliant reference board for evaluating the TMPR4938. This board has a CPU, a 128-MB SO-DIMM DRAM, a 16-MB NOR
flash ROM, a detachable 32-MB NAND flash ROM and a PCI controller. On-chip features include an Ethernet controller, a debug Ethernet, an
SIO, an ATA (IDE), an AC-Link interface, and an EEPROM and an RTC connected to the SPI. It also provides an expansion connector.
TMPR4938XBG-300/333
RBHMA4500(CE)
TX4939XBG-400
RBTX4938
RBTX4939
This is an ATX-compliant reference board for evaluating the TX4939. It mainly consists of two modules: an independent CPU module having a
DDR-SDRAM and an EJTAG interface, and a BASE board with a CPU module that allows the on-chip PCI, ATA, Ethernet MAC (RMII) and
Video/Audio to be evaluated.
RBHMS4700(CE)
TC86C001FG(GOKU-S)
RBHPE4300(CE)
⎯
This is a reference board is compliant with the PCI card edge specification (3.3 V, 33-MHz, 32-bit) and is used to evaluate the TC86C001FG. It
has a connector to which the ATA/ATAPI, two USB 1.1 host channels, a USB 1.1 device, I2C and SIO channels can be attached.
RBTC86C1
This is a backplane board that can be used for system evaluation in conjunction with a PCI-compliant referenced board. It consists of a
PCI-card-type CPU board and four PCI bard slots. A commercially-available ATX-compliant power supply may be used.
RBHBK4400
RBHBK4400(CE)
•
Contact the Toshiba sales representative for information about RoHS compliance before you purchase any components.
ꢀꢀ
TOSHIBA [ TOSHIBA ]
