XC6201
Series
■TEST
CIRCUITS
Circuit
①
: Supply Current
Circuit
②
: Output Voltage, Oscillation, Line Regulation, Dropout Voltage, Load Regulation
■
NOTE ON USE
1. Please use this IC within the stated absolute maximum ratings. The IC is liable to malfunction should the ratings be
exceeded. When a voltage higher than the V
IN
flows to the V
OUT
like when using two power supplies, please connect a
Schottky barrier diode between the V
OUT
and the V
IN
and do not exceed the V
OUT
rating.
2. An oscillation may occur by the impedance between a power supply and the input of the IC. Where the impedance is 10Ω
or more, please use an input capacitor (C
IN
) of at least 1μF. In case of high output current, operation can be stabilized by
increasing the input capacitor value. Also an oscillation may occur if the input capacitor value is smaller than the input
impedance when the output capacitance (C
L
) is large. In such cases, operations can be stabilized by either increasing the
input capacitor value or reducing the output capacitor value.
3. Please ensure that output current (I
OUT
) is less than
Pd / (V
IN
- V
OUT
)
and do not exceed the rated power dissipation value
(Pd) of the package.
7/24
TOREX [ TOREX SEMICONDUCTOR ]
