Series
ICs for use with Crystal Oscillators (PLL built‐in)
NCMOS
NOscillation
Frequency
: 10MHz ~ 25MHz
NOutput
Frequency : 80MHz ~ 160MHz (5.0V)
: 50MHz ~ 125MHz (3.3V)
NDivider
Circuit & PLL Circuit Built-In
N3-State
Output
NOscillation
Capacitor & Oscillation Feedback
Resistor Built-In
NMini
Mold SOT-26 Package
■Applications
GCrystal
Oscillation Modules
GComputer,
DSP Clocks
GCommunication
Equipment
GVarious
System Clocks
■General Description
The XC2173 series are high frequency, low power consumption CMOS
ICs with built-in crystal oscillator, divider and clock multiplier PLL circuits.
Output is selectable from any one of the following values for f0 :
f0 x 5, f0 x 6, f0 x 7, f0 x 8, f0/2, f0/4, f0/8. With an oscillation capacitor &
oscillation feedback resistor built-in, a stable oscillator circuit can be put
together using only an external crystal oscillator.
By connecting an external standard clock, the above mentioned output
frequencies can be achieved.
■Features
Oscillation Frequency
: 10MHz ~ 25MHz
Divider Ratio
: f0/2, f0/4, f0/8
Multiplier
: f0 x 5, f0 x 6, f0 x 7, f0 x 8
Output
: 3-State
Operating Voltage Range
: 3.3V ±10% and 5.0V ±10%
Small Consumption Current
: Stand-by function included*
* oscillation continues in stand-by
Ultra Small Package
: SOT-26 mini mold
■Pin Configuration
/INH
XT
V
SS
1
2
3
6
5
4
■Pin Assignment
PIN
NUMBER
PIN NAME
/INH
XT
V
SS
Qo
V
DD
/XT
FUNCTION
Stand-by control*
Crystal Oscillator Connection (Input)
GND
Clock Output
Power Supply
Crystal Oscillator Connection (Output)
/ Standard Clock Input
/XT
V
DD
Q
O
1
2
3
4
5
SOT-26
( TOP VIEW )
6
* Stand-by control pin has pull-up resistor built-in.
■INH - B, Q0 Pin Function
/INH
"H"
"L"
OPEN
"H" = High Level
"L" = Low Level
Q
0
Divider/Multiplier Output
High Impedance (Stand-by)
Divider/Multiplier Output
14
1039